DVR4C Remote Viewer Operation Manual Live Viewer
EN 7
3.1.4Folders
You can use folders and subfolders to organize your list of DVRs. To create a folder:
1. Right click the mouse in the DVR list window and select New Folder.
>The New Folder screen appears.
>To create a subfolder right click on an existing folder in the list.
2.Enter a name for the folder and click OK.
3.Drag and drop DVRs from the list into the folders and subfolders you have created.
3.1.5Viewing live images
To see a live image, click a DVR to open it. If required, fill- in a user name and password. If not shown, click on a camera to view.
3.3 Assigning cameos
A cameo is a single camera picture in a multiscreen display. To assign a camera to a cameo:
1.Click one of the camera view icons to select a multiscreen view.
2.Click on a DVR.
3.Click on the + beside the DVR name.
>A list of connected cameras appears.
4.Click on the cameo where you want that camera picture to be shown.
>A border appears around the cameo.
5.Click on a camera.
>The camera picture appears in the cameo.
You can change the position of a cameo by dragging and dropping it around the viewing area.
3.2 Group mode
Click the arrow next to the DVR box on the upper right of the screen and select Group from the
3.2.1Registering a group
1.Click or move the mouse to the group list, right click and select Add Group.
2.Enter a group name and select the cameras to include in the group.
>The selected cameras are grouped and shown in the group list.
>Each group is limited to sixteen cameras.
Edit group information by selecting a group. Click or select Edit by right clicking the mouse.
3.2.2Deleting a group
1.Select a group, then click or select Delete by right clicking the mouse.
2.Click OK to confirm.
3.2.3Viewing group images
Click the group icon to monitor images. The cameo display mode is automatically selected according to the number of cameras within the group.
3.4 Camera views
To switch the display mode, click one of the camera view
icons to change the cameo display configuration.
>Single, Quad, 3x3, 12+1 and 4x4
>3x3, 12+1 and 4x4
Click or press Alt+Enter for
>
3.5Sequencing
1.Set dwell time by clicking .
2.Click the sequence icon .
3.To stop the sequence mode, click again.
>In sequence mode, the time duration can be set between 5 and 60 seconds. Default value is 5 seconds.
>In