Aiphone AC-10F, AC-10S Functions Setting UP, Nederlands Español Deutsch Français English

Nederlands Español Deutsch Français English

FUNCTIONS SETTING UP

This section explains the settings of each function, including the master code for management, the user code for unlocking, the buzzer and the LEDs.

About the setting mode:

Enter master code twice to switch to the setting mode, and enter the following setting code to perform the settings for the desired function. After settings have been made, enter the following setting codes to continue the setting operation. Press to exit the setting mode.

	Setting items		Allowable setting range	Default value	Setting code
Setting the code length			4, 5, or 6 digits	4 digits
Change the length of the master code and the user code.
)They both must be the same length.
Setting the master code			1	1234
Enter a master code using between 4 and 6 digits (alpha or numeric) to			Valid keys: 0 - 9, A, B
switch to the setting mode.
) The number of digits in the code can be set by setting the code length.
Setting the code for user group 1			Number of codes: 60	-	-
Set the unlocking code for user group 1.			Valid keys: 0 - 9, A, B
) The number of digits in the code can be set by setting the code length.
Setting the code for user group 2			Number of codes: 40	-	-
Set the unlocking code for user group 2.			Valid keys: 0 - 9, A, B
) The number of digits in the code can be set by setting the code length.
Setting the key illumination time			Illumination time: 10 to 99	10 Sec.
Set the length of time that the keys will be lit up after they are pressed.			seconds, or continually lit
Setting the relay 1 output time			Output time: 1 to 99	3 Sec.
Set the output time of relay 1.			seconds, or latched
Setting the relay 2 output time			Output time: 1 to 99	3 Sec.
Set the output time of relay 2.			seconds, or latched
Reset Settings			-	-
Return all the settings to their default values.
External output setting			· OFF	OFF
The alarm or security system connected to the terminal of relay 2 will be			· During Lockout
activated when the "Lockout" * or the forced entry* is carried out.			· During forced entry output
* "Lockout": Refer to VIII below. *Forced entry: This function is linked with			· During lockout and forced
the door open/close sensor (N.C.) which is connected to PB2 and C, and			entry output
carried out when opening the door without activating this unit. (For example,
entry in an improper manner, manual unlock, etc.)
) If there is a way to open the door without activating this unit, such as
manual unlock, do not make the external output setting for the forced entry.
Lockout			ON/OFF	OFF
If several incorrect access codes are attempted, the code input function is			Invalid number of times:
disabled for a programmed period of time.			10 to 99 times
· When "Lockout" is activated, the LED (Orange) indicator and the keypad			Invalid time:
blink, and the buzzer sounds for 3 seconds. This is just a sound to inform			10 to 99 seconds
you that the function has been activated. It is not a warning sound. If you
want a warning to be sounded, please use the external output function to
activate a commercially-available alarm device.
· The unlock function will work when the request to exit/entry button is
pushed, even while the "Lockout" function is operating.
Auto-relock (Anti-tailgate)			ON/OFF	OFF
After the door has been linked to the door open/close sensor (N/C), and
unlocked, it will relock itself one second after being closed, thus preventing
the entry of an unauthorized third party. )1
Timer-linked unlocking setting			Linked relay: relay 1	Linked relay: relay 1
The system can be set to unlock the door by pressing the		key within	relay 2	0 key illumination: OFF
the set time and linking it to the external timer (N/O). The operations for the			relay 1 and 2
LEDs and the buzzer after unlocking are the same as those used to perform			0 key illumination: ON/OFF
user code unlocking. When the door is linked to the timer, unlocking can be
performed using the user code and the request to exit/entry button. When
latch output is performed for the relay settings, the relay turns ON/OFF
every time the	key is pressed.
Operation tone settings			ON/OFF	ON

Set the tone heard when the keypad is being used to ON/OFF.

•The setting can be saved even when the power is off.

•The system cannot be switched to the setting mode while the relay is unlocked.

•When the setting mode has been activated and no operations are performed for approximately 120 seconds, the system will exit the setting mode. (If a key is pressed during that time, the timer will start over.)

•Neither the request to exit/entry button nor the timer-linked unlocking key can be operated, and unlocking using the user code cannot be performed while the setting mode is activated.

•The volume (the check tone, operation tone, etc.) from the main unit may become lower according to the mounting status.

5 1 : When the auto-relock is used, the request to exit/entry button for relay 2 cannot be used. The output of relay 2 is only possible when user code unlocking is performed.