Revolabs 01-HDEXEC-NM Monitor Microphone Type, Monitor Microphone Version

Page 17

Monitor – Microphone Lock:*

Each microphone has individual lock capabilities. By turning on the lock for a specific microphone, the microphone mute button will deactivate leaving the user without the ability to individually control the microphones mute status at the microphone. However, the HD Control Panel Software, as well as any connected Serial Control Processor, will still have the ability to control and monitor all locked microphones.

Note: A microphone lock is stored in the Base Station. If a new microphone is paired to a locked channel, that microphone will then be locked as well. The same goes for a locked microphone that is paired to an unlocked channel, that microphone will then be unlocked.

Monitor – Microphone Mute:*

Each microphone has individual mute capabilities. The HD Control Panel Software provides the user the ability to mute and unmute a microphone from their PC. These mute controls will always remain synchronized to the actual state of the microphone. If the microphone state is changed through another method, the mute controls will display that change.

Monitor – Microphone Gain:*

Each microphone has an individual gain fader. This fader provides +/- 10dB of gain in 5dB increments. The microphone gains are stored in the Base Station and will be applied to any microphone paired to that channel.

Monitor - Microphone Status:*

This provides the current status for the microphone paired to each channel. The status can read any of the following states:

OFF

=

Microphone is has been turned off

ON

=

Microphone is on and operational

CHRG

=

Microphone is in the Charging Base

OUT

=

Microphone is out of range and cannot communicate

Monitor - Microphone Type:

This provides the current type for the microphone that is paired to each channel.

Monitor - Microphone Version:

This provides the current firmware version for the microphone that is paired to each channel.

Note: The microphone firmware version must match the Base firmware version for the system to function properly. A mismatch may result in no audio from the microphones.

Monitor - Microphone Battery:

This provides the current battery level for the microphone that is paired to each channel and active. The value changes in 12.5% increments and represents the bottom of the range the battery is in. Therefore a value of 87% means that the battery level is between 87%-100%.

Monitor - Pairing:*

This provides the ability to activate pairing mode for the respective base station channel. It also provides the pairing status of any base station channel already in pairing mode. The pairing controls will work regardless of the state of the ‘Base Pairing Lock’

- 17 -

Image 17
Contents Revolabs Executive HD Page Contents FCC Notice to Users Safety and General InformationStandards to which Conformity is declared System Components IntroductionInstalling the Revolabs Executive HD Base Station Controls and Connections Revolabs Executive HD Audio Connections Configuring the Executive Hdtm Base StationUsing Multiple Revolabs Executive Hdtm Systems Together Primary DIP#1 -off Secondary DIP#1 -on Wire BUS cable Revolabs HD Gold Control Panel Using the Rear Panel Configuration DIP SwitchesUsing the Revolabs HD Control Panel Software System Scan Network Configuration SettingsFile Record Events System Set Box Name System Set Telnet PasswordSystem Set IP Configuration Firmware Update Firmware System Enable GoldConfig External Control Processor Tools Express PairConfig Redundancy Config Audio ModeConfig Power Scaling Config Transmit PowerStatus Monitoring Config Lock Front PanelConfig Audio Zone Monitor Microphone Version Monitor Microphone BatteryMonitor Microphone Type Monitor DIP Switches Using the Serial Control Processor RS-232 or IPUsing the Executive HD Base Station with a Control System Monitor VersionsString Table Serial Command & Return StringsPage Channel # Using the Executive HD Base Station with a DSPExamples ClearOne Converge & XAPMUTE4 Biamp Audia & NexiaPolycom SoundStructure Using the Base Station Front Panel Display Revolabs HD Microphones and HD Microphone Adapters Using the HD Wearable Wireless MicrophonesAdjusting the Volume on the Wearable Microphone Earpiece Pickup 360 ºPage Using the HD XLR Microphone Wireless Adapter Using the HD Wireless Adapter for Countryman Microphone Pairing Wireless Microphones to Base Station Revolabs Executive HD Charger Base Updating the Revolabs Hdtm Firmware Power ModuleCharging the Microphone Batteries Updating the Executive HD Base Station & MicrophonesPage Green Revolabs Executive HD Indicator LEDsRevolabs Executive HD MaxSecure Warranty Dimensions, L, W, H and Weight SpecificationsBattery LED indicator Power Cord ReceptacleIndex Charger BaysRevolabs Executive HD Manual Exeman PAP February 2013 Rev 2

01-HDEXEC-NM specifications

The Revolabs 01-HDEXEC-NM is a sophisticated audio device designed to provide exceptional sound quality for various professional applications. This high-definition audio solution is particularly popular in conference rooms, classrooms, and corporate settings where clear communication is critical. It exemplifies the integration of advanced technologies with user-friendly features, making it a valuable addition to any audiovisual setup.

One of the standout features of the Revolabs 01-HDEXEC-NM is its wireless capabilities. This device enables users to connect via Bluetooth and operate without the hassle of tangled cables, allowing for greater flexibility in movement during presentations or meetings. The wireless range is impressive, ensuring that audio transmission remains strong and clear, even in larger spaces.

Another significant advantage is its high-definition audio quality. The Revolabs 01-HDEXEC-NM utilizes advanced audio processing technologies that minimize latency and enhance clarity, providing an immersive sound experience for all participants. This high-level audio fidelity is critical in settings where communication is key, such as video conferencing, webinars, and live discussions.

The device also includes multiple channels, allowing it to support multiple microphones and audio sources simultaneously. This feature is especially useful in collaborative environments, where several speakers may need to share their input without interruption. The intuitive user interface makes it easy to switch between channels, ensuring a seamless experience for all users.

In terms of installation, the Revolabs 01-HDEXEC-NM is designed with compatibility in mind. It integrates effortlessly with existing conferencing systems and can be connected to various devices, from computers to tablets. This capability allows users to leverage their current technology while upgrading their audio quality significantly.

Durability and reliability are also key characteristics of the Revolabs 01-HDEXEC-NM. Engineered for rigorous use, this device is built to withstand the demands of busy professional environments. It is designed to provide consistent performance, reducing downtime and maintenance needs.

In summary, the Revolabs 01-HDEXEC-NM is a versatile audio solution that combines wireless functionality, high-definition sound quality, and multiple channel support. With its ease of integration and user-friendly design, it stands out as an essential tool for enhancing communication in professional settings. Whether used for meetings, lectures, or remote collaboration, this device delivers an audio experience that is both clear and reliable.