Revolabs 01-HDEXEC-NM Adjusting the Volume on the Wearable Microphone Earpiece

Page 26

Revolabs HD Wearable Microphones turn on and mute automatically when removed from Charger Base, to reduce noise while being attached.

To use the HD Wearable Microphone:

5.Remove the microphone from the Charger Base.

6.Attach the microphone to clothing or to a lanyard, position microphone just above the sternum or breastbone, within 6 - 12 inches (15 – 30cm) from the mouth is recommended. Make sure microphone is attached securely with the microphone LED indicator pointed up toward mouth.

7.With the microphone in the wearing position, un-mute the microphone by pressing and releasing the Mute button (confirm by a flashing GREEN LED). If the volume is too low, move the microphone closer to the mouth.

8.To turn microphones off, return the microphone unit to the Charger Base or press and hold the Mute button for ~10 seconds until the LED turns solid RED then release button.

If the microphones are moved out of range of the Base Station (~300 feet or 91 meters) the connection will be dropped (LED flashes all red, green, yellow) and the microphone will mute.

After 15 seconds the microphone will beep 5 times, and will continue beeping every 30 seconds to remind the user to return the microphone to the conference room. If the microphone is moved back into range within 15 minutes the connection will automatically be re-established to its original state, and the beeping will cease. If not, the microphone will turn off.

Adjusting the Volume on the Wearable Microphone Earpiece

To change the volume on the Wearable microphone earpiece, use the dial on the earpiece wire.

Turning the dial towards the earpiece, as shown in the figure, will increase the volume, and turning the dial towards the microphone will decrease the volume. Use the attached clothing clip to secure the earpiece wire.

- 26 -

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Revolabs Executive HD Page Contents Safety and General Information FCC Notice to UsersStandards to which Conformity is declared Introduction System ComponentsInstalling the Revolabs Executive HD Base Station Controls and Connections Revolabs Executive HD Audio Connections Configuring the Executive Hdtm Base StationUsing Multiple Revolabs Executive Hdtm Systems Together Primary DIP#1 -off Secondary DIP#1 -on Wire BUS cable Revolabs HD Gold Control Panel Using the Rear Panel Configuration DIP SwitchesUsing the Revolabs HD Control Panel Software System Scan Network Configuration SettingsFile Record Events System Set Box Name System Set Telnet PasswordSystem Set IP Configuration Config External Control Processor System Enable GoldFirmware Update Firmware Tools Express PairConfig Power Scaling Config Audio ModeConfig Redundancy Config Transmit PowerStatus Monitoring Config Lock Front PanelConfig Audio Zone Monitor Microphone Version Monitor Microphone BatteryMonitor Microphone Type Using the Executive HD Base Station with a Control System Using the Serial Control Processor RS-232 or IPMonitor DIP Switches Monitor VersionsSerial Command & Return Strings String TablePage Examples Using the Executive HD Base Station with a DSPChannel # ClearOne Converge & XAPBiamp Audia & Nexia MUTE4Polycom SoundStructure Using the Base Station Front Panel Display Using the HD Wearable Wireless Microphones Revolabs HD Microphones and HD Microphone AdaptersAdjusting the Volume on the Wearable Microphone Earpiece 360 º PickupPage Using the HD XLR Microphone Wireless Adapter Using the HD Wireless Adapter for Countryman Microphone Pairing Wireless Microphones to Base Station Revolabs Executive HD Charger Base Charging the Microphone Batteries Power ModuleUpdating the Revolabs Hdtm Firmware Updating the Executive HD Base Station & MicrophonesPage Revolabs Executive HD Indicator LEDs GreenRevolabs Executive HD MaxSecure Warranty Specifications Dimensions, L, W, H and WeightBattery Index Power Cord ReceptacleLED indicator Charger BaysRevolabs Executive HD Manual Exeman PAP February 2013 Rev 2

01-HDEXEC-NM specifications

The Revolabs 01-HDEXEC-NM is a sophisticated audio device designed to provide exceptional sound quality for various professional applications. This high-definition audio solution is particularly popular in conference rooms, classrooms, and corporate settings where clear communication is critical. It exemplifies the integration of advanced technologies with user-friendly features, making it a valuable addition to any audiovisual setup.

One of the standout features of the Revolabs 01-HDEXEC-NM is its wireless capabilities. This device enables users to connect via Bluetooth and operate without the hassle of tangled cables, allowing for greater flexibility in movement during presentations or meetings. The wireless range is impressive, ensuring that audio transmission remains strong and clear, even in larger spaces.

Another significant advantage is its high-definition audio quality. The Revolabs 01-HDEXEC-NM utilizes advanced audio processing technologies that minimize latency and enhance clarity, providing an immersive sound experience for all participants. This high-level audio fidelity is critical in settings where communication is key, such as video conferencing, webinars, and live discussions.

The device also includes multiple channels, allowing it to support multiple microphones and audio sources simultaneously. This feature is especially useful in collaborative environments, where several speakers may need to share their input without interruption. The intuitive user interface makes it easy to switch between channels, ensuring a seamless experience for all users.

In terms of installation, the Revolabs 01-HDEXEC-NM is designed with compatibility in mind. It integrates effortlessly with existing conferencing systems and can be connected to various devices, from computers to tablets. This capability allows users to leverage their current technology while upgrading their audio quality significantly.

Durability and reliability are also key characteristics of the Revolabs 01-HDEXEC-NM. Engineered for rigorous use, this device is built to withstand the demands of busy professional environments. It is designed to provide consistent performance, reducing downtime and maintenance needs.

In summary, the Revolabs 01-HDEXEC-NM is a versatile audio solution that combines wireless functionality, high-definition sound quality, and multiple channel support. With its ease of integration and user-friendly design, it stands out as an essential tool for enhancing communication in professional settings. Whether used for meetings, lectures, or remote collaboration, this device delivers an audio experience that is both clear and reliable.
Top Page Image Contents