Revolabs 01-HDEXEC-NM Pairing Wireless Microphones to Base Station

Page 31

4.LED display — visual status for mute, un-mute, and pairing.

5.TA4M connector — connects to Countryman microphone cable.

To use the HD Wireless Adapter for Countryman Microphone:

20.Remove the Microphone Adapter from the Charger Base.

The adapter turns on and mutes automatically when removed from Charger Base (flashing RED LED). The Microphone Adapter is attached to a Countryman Microphone with the specific cable designed for Revolabs. The HD Wireless Adapter for Countryman microphone supplies the necessary phantom power specifically for the Countryman microphone.

21.To turn the Adapter off, return the microphone unit to the Charger Base or press and hold the Mute button for ~10 seconds until the LED turns solid RED then release button.

Important: Always remove the microphone from the Adapter and separate the parts before returning the Adapter to the Charger Base.

If the Adapter is moved too far from the Base Station (~300 feet or 91 meters) the connection will be dropped (LED flashes all colors) and the audio will mute. After 15 seconds the microphone will beep 5 times, and will continue beeping every 30 seconds to indicate that it is out of range.

Move the Countryman Adapter closer to the Base Station and the connection will automatically be re- established to its original state, and the beeping will cease. If not, the Countryman Adapter will continue beeping until it turns off in about 15 minutes.

Pairing Wireless Microphones to Base Station

Pairing creates a link between the HD wireless microphone and the Base Station, with a unique electronic serial number. When the microphone and Base Station have been previously paired, the mic will automatically try to connect to the same Base Station whenever it is lifted from the Charger Base.

Note: Microphones in new systems must be paired to the Base Station with each microphone assigned to a unique channel on the base unit.

Remember, microphones are by default muted (flashing RED LED) when they are removed from the Charger Base and the Mute button needs to be pressed to make it “live” (flashing GREEN LED).

A microphone that is not paired will be indicated by a cycling RED-GREEN LED pattern. A Base Station channel that is not paired to a microphone will not show any activity on the channel LED (make sure unit is first powered on by observing GREEN backlit front panel display).

When channels are paired, both microphone and channel LEDs will flash RED as microphones are removed from the Charger Base and flash GREEN when un-muted. Remember that only one microphone can be paired to any single Base Station channel.

“Express Pair” is a tool in the HD Control Panel Software that can be used to pair all the microphones in a Charger Base to a Base Station at the same time. (See: Tools – Express Pair)

- 31 -

Image 31
Contents Revolabs Executive HD Page Contents FCC Notice to Users Safety and General InformationStandards to which Conformity is declared System Components IntroductionInstalling the Revolabs Executive HD Base Station Controls and Connections Using Multiple Revolabs Executive Hdtm Systems Together Configuring the Executive Hdtm Base StationRevolabs Executive HD Audio Connections Primary DIP#1 -off Secondary DIP#1 -on Wire BUS cable Using the Revolabs HD Control Panel Software Using the Rear Panel Configuration DIP SwitchesRevolabs HD Gold Control Panel File Record Events Configuration SettingsSystem Scan Network System Set IP Configuration System Set Telnet PasswordSystem Set Box Name Tools Express Pair System Enable GoldFirmware Update Firmware Config External Control ProcessorConfig Transmit Power Config Audio ModeConfig Redundancy Config Power ScalingConfig Audio Zone Config Lock Front PanelStatus Monitoring Monitor Microphone Type Monitor Microphone BatteryMonitor Microphone Version Monitor Versions Using the Serial Control Processor RS-232 or IPMonitor DIP Switches Using the Executive HD Base Station with a Control SystemString Table Serial Command & Return StringsPage ClearOne Converge & XAP Using the Executive HD Base Station with a DSPChannel # ExamplesMUTE4 Biamp Audia & NexiaPolycom SoundStructure Using the Base Station Front Panel Display Revolabs HD Microphones and HD Microphone Adapters Using the HD Wearable Wireless MicrophonesAdjusting the Volume on the Wearable Microphone Earpiece Pickup 360 ºPage Using the HD XLR Microphone Wireless Adapter Using the HD Wireless Adapter for Countryman Microphone Pairing Wireless Microphones to Base Station Revolabs Executive HD Charger Base Updating the Executive HD Base Station & Microphones Power ModuleUpdating the Revolabs Hdtm Firmware Charging the Microphone BatteriesPage Green Revolabs Executive HD Indicator LEDsRevolabs Executive HD MaxSecure Warranty Dimensions, L, W, H and Weight SpecificationsBattery Charger Bays Power Cord ReceptacleLED indicator IndexRevolabs Executive HD Manual Exeman PAP February 2013 Rev 2

01-HDEXEC-NM specifications

The Revolabs 01-HDEXEC-NM is a sophisticated audio device designed to provide exceptional sound quality for various professional applications. This high-definition audio solution is particularly popular in conference rooms, classrooms, and corporate settings where clear communication is critical. It exemplifies the integration of advanced technologies with user-friendly features, making it a valuable addition to any audiovisual setup.

One of the standout features of the Revolabs 01-HDEXEC-NM is its wireless capabilities. This device enables users to connect via Bluetooth and operate without the hassle of tangled cables, allowing for greater flexibility in movement during presentations or meetings. The wireless range is impressive, ensuring that audio transmission remains strong and clear, even in larger spaces.

Another significant advantage is its high-definition audio quality. The Revolabs 01-HDEXEC-NM utilizes advanced audio processing technologies that minimize latency and enhance clarity, providing an immersive sound experience for all participants. This high-level audio fidelity is critical in settings where communication is key, such as video conferencing, webinars, and live discussions.

The device also includes multiple channels, allowing it to support multiple microphones and audio sources simultaneously. This feature is especially useful in collaborative environments, where several speakers may need to share their input without interruption. The intuitive user interface makes it easy to switch between channels, ensuring a seamless experience for all users.

In terms of installation, the Revolabs 01-HDEXEC-NM is designed with compatibility in mind. It integrates effortlessly with existing conferencing systems and can be connected to various devices, from computers to tablets. This capability allows users to leverage their current technology while upgrading their audio quality significantly.

Durability and reliability are also key characteristics of the Revolabs 01-HDEXEC-NM. Engineered for rigorous use, this device is built to withstand the demands of busy professional environments. It is designed to provide consistent performance, reducing downtime and maintenance needs.

In summary, the Revolabs 01-HDEXEC-NM is a versatile audio solution that combines wireless functionality, high-definition sound quality, and multiple channel support. With its ease of integration and user-friendly design, it stands out as an essential tool for enhancing communication in professional settings. Whether used for meetings, lectures, or remote collaboration, this device delivers an audio experience that is both clear and reliable.