Video Quality, Timer Rec Frame Rate | SVAT Electronics CLEARVU2

SVAT ELECTRONICS

now you can see

Video Quality

Press ►/4 to select between Low, Normal and High quality settings. Lower quality settings will record a lower quality picture but will allow you to record more footage. Higher quality settings will record a higher quality picture but will use more storage space on the DVR’s hard drive.

Timer Rec Frame Rate

Press ►/4 to change the timer record frame rate. This is the frame rate used when the DVR is scheduled to record by time (T). A lower frame rate will make the video footage more choppy, but will allow you to record more footage. A higher frame rate will make the video footage more fluid, but will use more storage space on the DVR’s hard drive.

Motion Rec Frame Rate

Press ►/4 to change the motion record frame rate. This is the frame rate used when the DVR is scheduled to record by motion alert (A). A lower frame rate will make the video footage more choppy, but will allow you to record more footage. A higher frame rate will make the video footage more fluid, but will use more storage space on the DVR’s hard drive.

Motion Rec Time

Press ►/4 to adjust the amount of seconds that the DVR will record after it detects motion (only when set to Motion Detect [A] or Time Motion [M] mode).

Record Mode

This menu allows you to set up the preferred type of scheduled recording (time,motion, time/motion off) throughout a 24 hour day (the time displayed is in military time (0 -24). For example, you may want to record continuously from 9:00 AM to 5:00 PM, but only record when motion is detected the rest of the time.

IMPORTANT: After you make changes and return to monitoring mode, you must press

to begin recording.

When you press

to stop recording, the DVR will not adhere to your Record Mode settings until you press

to begin recording again. Use the ▲/1▼/3 buttons to select the hour of the day, and press ►/4 to change the type of recording for the specified hour of the day.

CLEARVU2