SVAT ELECTRONICS
now you can see
Time Recording [T]
The DVR will record continuously during the set time.
Motion Recording [A]
The DVR will record only when motion is detected during the set time.
Time Motion (Mixed) [M]
The DVR will record continuously during the set time, but when motion is detected it will record using the frame rate you set in “Motion Rec Frame Rate.”This is useful if you want to save DVR storage space by setting the Timer Rec Frame Rate to a lower
number and the Motion Rec Frame Rate to a higher number. When no motion is detected, the DVR will record using less storage space (high quality footage is not needed since there is nothing happening). When motion is detected, the DVR will use more space but the footage will be more fluid. Setting the record mode to Time Motion will allow you more hours of recording time.
Disable Recording [–]
The DVR will not record during the set time.
IMPORTANT: After settings are changed and you exit the menu, press
to confirm your recording schedule.
Buzzer Setup
Use this menu to change the way the DVR alerts you (audio alerts).
Motion Alert
Press ►/4 to turn motion alert ON/OFF. The motion alert will sound whenever motion is detected on one of your cameras. Motion alerts will only sound when the DVR is recording
Video Loss Alert
Press ►/4 to turn video loss alert ON/OFF. The video loss alert will sound whenever one of your cameras loses power or gets disconnected.
HDD Full Alert
Press ►/4 to turn HDD full alert ON/OFF. The HDD full alert will sound when the hard drive is full and you do not have it set to overwrite.
CLEARVU2 | 16 |