Mitsubishi Electronics WD-52526 manual Setup Menu, Language, Memorize Channels, Clock

42Chapter 4. TV Menu Operations

Setup Menu

Setup Menu

Figure 2

Figure 2. Setup menu

Language

Display the on-screen menus in either English or Spanish (Español). The first time you powered on your TV, you were requested to select an on-screen-menu language. If you choose to change the selection, all menu text will immediately switch to the language of your choice.

To listen to audio in other languages (when available), see the section entitled “Audio Settings” in chapter 4.

Memorize Channels

For Antenna 1 (ANT 1)

To start channel memorization, first select an input according to the table below.

Input		Condition
ANT 1	Air	When connected to an indoor/
		outdoor antenna
ANT 1	Cable	When connected to direct cable

Press ENTER to start the automatic channel-memoriza- tion process.

During the memorization process, all possible channels on the selected antenna are scanned twice. Analog chan- nels are scanned first and then the process is repeated for digital channels.

To stop the automatic channel-memorization process before it completes, press CANCEL. Channels memo- rized before you pressed CANCEL are retained in memory. If you start the memorization process again, all previously memorized channels are erased and the process starts over from the beginning.

After channel memorization, the channels in memory can be accessed in ascending or descending order by press-

ing CH or . Select the Channel Menu to access further channel-editing features, such as channel add or delete, channel name, and SQV custom favorite channel memories.

Clock

Figure 3

You may choose to set the clock either manually or auto- matically. The TV uses the clock time for timer functions.

Manual

To set the clock manually, select the current time, current date, and time zone for your area.

Figure 3. Clock menu. Setting the clock manually.

Time

Press ADJUST or repeatedly to slowly select the hour or press and hold to quickly select the hour. Press ENTER to move to the minutes options. Press ADJUST or to select minutes.

Date

Press ADJUST or to select the correct date.

Time Zone

Select your correct time zone. Press ADJUST or to select the time zone (Atlantic, Eastern, Central, Mountain, Pacific, Alaska or Hawaii) for your area.

Auto

Select the Time Zone and the Daylight Savings time (DST) option that your state uses. Press ADJUST or to select Applies if your state or area uses DST, or Ignore if DST does not apply. You may then tune to a channel (on ANT 1) that uses Extended Data Service (XDS) time data, typically a PBS channel.

The Auto selection automatically retrieves the correct time and date information from this channel. Be aware that if a channel displays incorrect time information, it is because of information sent from the broadcaster and is not a defect of the TV.