32Chapter 3. TV Operation
Choosing a Program Source (Device Selection Menu)
Figure 1
Press DEVICE on the TV’s remote control to open the Device Selection menu (Figure 1). The Device Selec- tion menu allows you to select an input for viewing. The device or input currently displayed on the TV appears as a
•To assign meaningful labels to the icons, such as “VCR” or “DVD,” see the “Input Name” section of chapter 4, “TV Menu Operations.”
•To rearrange the icons, see the “Icon Order” section of chapter 4, “TV Menu Operations.”
Device
Section
Figure 1. Device Selection Menu
Device Section
To select another device or input, press ADJUST 
on the TV’s remote to move the highlight. Press ENTER to select the device to view and hear. The TV inputs are automatically changed.
Video Section
The destination of the device highlighted in the Device Section is displayed here as a TV icon.
ChannelView™ Channel Listings
Figures 2 and 3
Press GUIDE while viewing ANT 1 to display a list of avail- able memorized digital (D) and analog (A) channel infor- mation (if available from the broadcaster).
ChannelView for digital channels shows the major channel and 
or
to scan through all the channels in memory one by one. To cycle through the choices quickly, press CH
or .
For detailed program information for digital channels, press ADJUST ; to return to basic information, press ADJUST
. This information is sent by the broadcaster. If limited data is shown or no program data appears, it is because the broadcaster is not sending the information. This is not a defect of your TV.
Figure 2. ChannelView screen, current programs. Use
ADJUST 
to move between the displays for current and future programs.
Figure 3. ChannelView screen, future programs on the selected channel (digital channels only)
IMPORTANT
Leave the TV powered off for a while each day for the TV to receive ChannelView updates. The updates may take from five to 15 minutes to complete, depending on the number of channels in memory. Program listings will be temporarily lost if the TV loses power.
GUIDE and Devices
For satellite receivers and some cable boxes, when the remote has been programmed for the device, GUIDE dis- plays the
or cable box. Press ADJUST 
and ENTER to navigate the displayed Guide.
