Chapter 4. TV Menu Operations | 45 |
|
|
Channel Menu
Channel Menu
Figure 7
Indicator
|
|
|
|
Settings for | the Channel | SuperQuickView | |
Number Shown | Memory Banks | ||
Figure 7. The Channel menu is divided into three sections.
Prefer Digital
When a memorized channel number is available in both analog and digital formats, check the Prefer Digital box to display digital channels and hide analog channels when
using CH 
. Remove the check mark to show both analog and digital choices.
For digital channels, when the broadcaster has sent a virtual channel number, the virtual channel number is shown in the text box and the original digital channel is shown below on screen as a reference. One original channel number can be associated with several different virtual channels.
Memory
After the available channels have been memorized with Memorize Channels on the Setup menu, weaker chan- nels can be added or unwanted channels can be deleted.
Press CH 
on the remote control to see the chan-
nels in memory. Press ADJUST 
to select Added or Deleted for the channel shown in the Channel number box.
Name
Analog channels shown on ANT 1 can be named (up to four characters). After you enter a name, it will appear on the TV screen, next to the channel number.
1.Press ADJUST 
to select each letter.
2.Press ENTER to set the letter and move to the next letter position.
3.Press CANCEL to move back one position.
Digital channels are named automatically if the broad- caster sends the information.
Channel
You can select the channel number affected by this menu in any of three ways:
•Press ADJUST 
to move through channel numbers one at a time, including all memorized and
ENTER.
•Press CH 
to select from channels already in memory. If you also wish to tune to the channel, high- light the channel number and press ENTER.
•Enter the number directly and press ENTER. Note that with this method, you must press ENTER for the screen to display settings for the selected channel.
Channel numbers can be one part, analog or digital (up to the number 16383), or two part for digital channels. For
a
SQV (SuperQuickView™)
Figure 17
SQV (SuperQuickView™) allows you to put together lists of your favorite channels available on the antenna input. You can store channels in any of the nine different SQV memory banks. You can also store the same channel in multiple memory banks. Once you have added a channel to an SQV memory, “SQV” and the memory bank number appear under the tuned channel number on the TV screen.
Managing SQV Memory Banks through the Menu
Adding SQV Channels Using the Menu
1.Select the channel using the “Channel” option box or
press CH 
.
2.Highlight the desired bank
3.Press ENTER to check mark the selected SQV memory bank.
4.Repeat for additional channels or banks.
