Chapter 4. TV Menu Operations | 41 |
|
|
Main Menu
Press TV MENU on the remote control to open the Main menu, figure 1. See below for an overview of the settings available through the Main menu.
Figure 1. Main menu, Setup selected
Setup
Select English or Spanish for menus and
Memorize the available channels for the antenna or cable service connected to the ANT 1 input. Set the time for the TV manually or select Auto for the TV to automatically set the time based upon Extended Data Service (XDS) time data (usually broadcast by your local PBS station).
Set the TV timer.
Reset the lamp reminder.
View the TV’s software version.
Input Name
Identify the devices connected to the TV so that you can select them from the Device Selection menu.
Icon Order
Rearrange the icons in the Device Selection menu.
Channel
Edit channels for the ANT 1 input.
For channels broadcast in both digital and analog formats, choose to watch only the digital version. Manually add or delete channels from memory, name channels, or add your favorite channels to a SQV (SuperQuickView™) list.
View signal strength of the currently tuned digital channel.
Captions
Display closed captions if sent by the broadcaster.
Select settings for analog or digital captions.
V-Chip Lock
Block or allow programing based on rating signals sent by the broadcast station.
Lock the TV by time.
Lock the
Audio/Video
Reset the A/V Memory to the original factory settings for a selected device.
Customize individual audio and video settings.
Display a blue screen when viewing a device with no signal.
Enable/disable Film Mode.
Turn the TV speakers on or off.
