Motorola DSR-6400 manual GigE TS Mode Menu

Page 61

Press the 4 button until the cursor is at the GigE Default Gateway label, and press ENTER to move into the field. Use the arrow buttons (4) to enter the desired address and then press ENTER to confirm the selection and exit the field.

GigE TS Mode Menu

Press the  buttons until the Port GigE TS Mode menu appears. Use this menu to select which transport streams are routed to the GigE port and if the DSMCC data is also routed to the GigE port.

PORT GigE TS Mode

E Off

DSMCC Off

TS Mode Field

Default: Off

Press the 4 button until the cursor is at the TS Mode label, and press ENTER to move into the field. Press the  buttons to choose one of the four options: Off, Transcoded, Passthru, or Transcoded+Passthru. When Passthru is selected, a copy of the ASI OUT 1 transport stream is routed to the GigE port. When Transcoded is selected, a copy of the ASI OUT 2 transport stream is routed to the GigE port. When Transcoded+Passthru is selected, a copy of both ASI OUT 1 and ASI OUT 2 are routed to the GigE port. Press ENTER to confirm the selection and exit the field.

DSMCC Field

Default: Off

DSMCC data is IP data that is carried in the MPEG stream from the programmer. It is part of a programmer service and different programmer services may carry the same or different DSMCC data. The unit extracts the DSMCC data and outputs it as an IP stream from the GigE port.

Press the 4 button until the cursor is at the DSMCC label, and press ENTER to move into the field. Press the  buttons to choose either Off or On. When On is selected, the unit outputs only the DSMCC data from the first processor path (PR1). DSMCC data is not usually continuous, and so the unit only outputs DSMCC data when DSMCC data is present in the programmer service that is handled by the first processor. DSMCC data from other processor paths 2, 3, or 4 is disregarded. Press ENTER to confirm the selection and exit the field. When Off is selected, the unit does not output DSMCC data.

GigE Output Transport Streams

Transcoded and Passthru transport streams are separate and unique streams that can share the one physical GigE output port. The next two Port GigE IP menus described in this section provide a way to route each of these streams.

Note: For PID values associated with the GIGE output port, see "PID Mapping" on page 15.

DSR-6400 Series

61

Image 61
Contents Document No Operation Precautions Important Safety Instructions Advertencia Instrucciones de seguridad importantes Page Table of Contents Page DSR-6400 Series BitRt Field Status8SD Menu Chapter Page Introducing the DSR-6400 Series Key FeaturesDSR-6400 Series Models Model and Transcoding CapacityPID Assignments ASI OUT 1 Port PID MappingModel Available Relay Cue Tone PR Fields Processor / Back Panel AssociationsUnpacking and Connecting the DSR-6400 Series Unit Connecting the DSR-6400 Series UnitRelay UnpackingRack Mounting Guidelines Connecting the DSR-6400 Series Remote Operation To configure the DSR-6400 Series unit for remote operationTo operate the DSR-6400 Series decoder remotely Operating the DSR-6400 Series Using the Front Panel Navigating the Menus How to Use the Menus Overview of The LCD Panel Menu Tree Installation MenusChannel Selection Menus Diagnostic Menus Manual Tune Menu Installation MenusGigE Input ASI InputRF Input Mode Field Default Xpndr LFreq Field Modulation Menu Port Menu Port Config Menu Audio1 and Audio2 Menus DialNorm/Compress Field Default On-Moderate Audio1 and Audio2 Gain Menus Alarm Menu ASI Output Menu 4th Relay Menu DSR-6404 onlyOutput data rate is greater than 54 Mbps ASI Output Rate MenuReset Menu Pressing Enter or choosing Reset Type Video Out Menu Core MenuFirmware Menu Download Menu Disabled Channel Xpndr DR Menu Acquisition RecoveryChannel Menus Press E to continue or to stop Mpeg Select Menu AUD1LANG and AUD2LANG Menus Dspl Field Default All Text Lang Menu 10/100 MAC Address Menu IP Menus10/100 IP Address Menu 10/100 Dhcp Menu10/100 Subnet Mask Menu 10/100 Default Gateway MenuPort GigE MAC Address Menu GigE IP Address Menu GigE Default Gateway MenuGigE Subnet Mask Menu GigE TS Mode Menu GigE PassThru Dest Addr Menu GigE Xcoded Dest Addr MenuStatus0 Menu Status Display MenusASI Status1 MenuStatus3 Menu Status2 MenuStatus5 Menu Status4 MenuSync Field Status6 Menu Status7SD Menu Status8SD Menu Status10HD Menu Status9HD MenuStatus11 Menu Status12 Menu Status13 Menu Diagnostic Menus Unit Address Menu Audio Test Signal MenuTV Pass Card Menu NTSC/PAL M Test Pattern Options Video Test Signal MenuAd Insertion Test Menu If You Need Help Product SupportCalling for Repairs Downlink/L-Band Frequency Conversion Tables Page Language Abbreviations Language Abbreviation Introduction DiagnosticsFF1 Viewing the Fast Fact Diagnostic ScreensFast Facts 1 PRX Field Name Definition Fast Facts PRX VMC Fast Facts 4 Audio 1 Fast Facts 10/100 Ethernet Fast Facts Gigabit Network Fast Facts Decoder Address Fast Facts 8 Inbox Fast Facts 9 Archive Page DSR-6400 Series Specifications 100 101 Page Recycling Page Page Sequence Dr San Diego, CA Document No 583611-001, Rev. B

DSR-6400 specifications

The Motorola DSR-6400 is an advanced digital satellite receiver designed to meet the demands of both broadcasters and service providers. Renowned for its robust performance and versatility, the DSR-6400 is an ideal choice for delivering high-quality video content over satellite networks.

One of the main features of the DSR-6400 is its support for high-definition (HD) video formats. It is capable of receiving and processing HD 1080i and 720p signals, ensuring that users can enjoy crystal-clear video quality. The receiver supports MPEG-2 and MPEG-4 compression technologies, which optimize bandwidth usage and enhance the viewing experience. This dual support is particularly valuable as it allows for a seamless transition from standard definition to high definition broadcasts.

Another notable feature of the DSR-6400 is its modular architecture, which allows for easy upgrades and customization. This adaptability ensures that operators can scale their systems according to changing market demands or technological advancements. The receiver is equipped with multiple input and output options, including ASI, IP, and HDMI, making it suitable for various applications and environments.

The DSR-6400 also boasts advanced conditional access and security features. It is compatible with several encryption systems, ensuring that content providers can securely distribute their programming without the risk of unauthorized access. This is crucial in maintaining the integrity of broadcasting, especially for premium content.

In terms of reliability, the DSR-6400 is built to withstand the demands of 24/7 operations. Its failover capabilities and redundancy options make it a reliable choice for mission-critical broadcasting scenarios. Additionally, the receiver's diagnostics and monitoring tools allow operators to maintain optimal performance and quickly address any issues that may arise.

Overall, the Motorola DSR-6400 stands out as a powerful and flexible digital satellite receiver, equipped with state-of-the-art features that cater to the evolving needs of the broadcasting industry. Its combination of high-definition support, modular design, and strong security protocols makes it an essential component for those looking to deliver outstanding satellite television services. Whether for direct-to-home broadcasting or in a complex distribution environment, the DSR-6400 continues to be a trusted choice for professionals in the field.