MAIN MENU...continued
ALARM RECORD PPS
You can change the PPS for alarm record. You may wish to change the alarm PPS so that there is a higher PPS for when an alarm (e.g. motion) is detected by the DVR and a lower PPS for Normal Record.
To Change the Alarm Record PPS:
1.Select 
to adjust the Alarm Record PPS.
2.Use the mouse wheel or the directional buttons to adjust the PPS, the most PPS per camera is 30 PPS.
3.When in 720 x 240, you can change each camera’s PPS individually, and you have 120 PPS to distribute between the attached cameras.
4.When in 360 x 240 the Alarm PPS will change by two channels at a time (1 and 2, 3 and 4, 5 and 6 etc...) You will have a total of 240 PPS to distribute across the attached cameras.
5.Press ENTER or select
to save settings and return to record setup menu.
6.Exit the record setup menu to save changes.
7.Exit the main menu 
to save changes. The DVR will take a few moments to load the settings.
•There is a total of 240 PPS (for 360 x 240) available to share between the 16 channels
•There is a total of 120 PPS (for 720 x 240) available to share between the 16 channels
Note: By clicking the box next to the word ‘AVERAGE’ you can evenly distribute the PPS to all connected cameras for Normal PPS and Alarm Record PPS.
ALARM RECORD DURATION
Alarm Record Duration represents the length of time the DVR will record when it detects an alarm (motion, external alarm). You can set the Alarm Record Duration anywhere from 5 seconds to 99 seconds.
To set the Alarm Record Duration:
1.Highlight the Alarm Rec Duration option.
2.Use the mouse wheel or directional keys to change how long you want the DVR to record when an alarm is detected.
3.Press ENTER or Click 
to save changes.
4. | Click | to exit. |
5. | DVR may take a few moments to save the settings. | |
CV501 - 16CH | 24 |
|
|