Magellan MG-6060 installation manual X10 Transmitter Connection, Location and Mounting, Wall Plate

Page 11

X10 Transmitter Connection

Magellan supports the X10 communication protocol. X10 is a communication protocol for remote control of electrical devices such as lamps and appliances. Communication is accomplished through standard household electrical wiring using X10 transmitters and receivers. Configure Magellan, with the use of an X10 transmitter, to automate a home. Connect the X10 transmitter as shown in Figure 9 on page 9.

Refer to the Magellan X10 Instructions on our website, www.paradox.ca, for information on using and configuring Magellan’s X10 feature.

Figure 9: Connecting the X10 Transmitter

Location and Mounting

Location

The locations of Magellan and its wireless transmitters affect the overall performance of the wireless system. To ensure the best signal reception, the following list of location criteria should be respected whenever possible:

•

Select an installation site that is free of obstacles that reflect

 

and absorb radio frequency (RF) signals, as well as

 

interference that may distort signals. Avoid installation near

 

or in the path of strong RF fields (i.e. neon lights,

 

computers), and on or near metal objects, circuit breakers

Back view of the Magellan console.

1

1.Connect one end of the 4- pin RJ11 cable into the X10 plug of the console.

2.Connect the other end of the 4-pin RJ11 cable into the X10 transmitter.

3.Plug the X10 transmitter into a standard wall outlet.

3

 

boxes, air conditioners and heater ducts since they may

 

cause interference and reduce the console’s sensitivity.

•

Select a site that is not susceptible to drastic temperature

 

changes.

•

Mount the Magellan console as central as possible to the

 

proposed placement of the wireless transmitters.

•

Mount the Magellan console as high as possible.

•

Avoid installing Magellan in the basement as the range of

 

the console is reduced when installed below ground level.

 

However, if it is absolutely necessary to install the console in

 

the basement, install the console as high as possible.

•

Install the Magellan console on a wall allowing at least 5cm

 

(2”) around the console to permit adequate ventilation and

 

heat dissipation.

4-pin RJ11 cable

X10 transmitter

2

Connecting a Paradox Memory Key (PMC-3)

When using a Paradox Memory Key with a Magellan console, remove power (both AC and battery power), connect the memory key to the 5-pin connector on the back of the Magellan console as shown in Figure 10 on page 9. Once connected, re-apply power to the console. For more information, see Programming Using a Paradox Memory Key on page 11.

Figure 10: Connecting a Paradox Memory Key (PMC-3)

Jumper ON:

Read from and/or write to memory key

Jumper OFF:

Write protected (read from memory key only)

The Wall Plate

Magellan uses a plastic wall plate to stay mounted on a wall. The wall plate is also used for tabletop mounting to cover the back of the console as well as keep any wires within their respective wire slots. After choosing an appropriate location (see Location on page 9), mount the wall plate onto the Magellan console with two screws as described in Mounting Magellan on the Wall on page 10 or Tabletop Mounting on page 10.

Figure 11: Wall Plate

B

AA

CC

Paradox Magellan Systems

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Page Page Table of Contents List Index Conventions SpecificationsIntroduction About Magellan and this ManualQuick Setup Deleting Zones PasswordsInstaller code Maintenance code Panel ID PC Password Time and DateTelephone Line Connections InstallationAC Power Backup Battery PackLine Plug Connect Programmable Outputs PGMsUIP-256 Universal In-Field Programmer Connection Hardwire Zone ConnectionsWinLoad Connection Location Connecting a Paradox Memory Key PMC-3X10 Transmitter Connection Location and MountingTabletop Mounting Connecting the Radio AntennaMounting Magellan on the Wall Programming Methods WinLoad Installer Upload/Download SoftwareProgramming Using the Built-in Keypad Programming Using a Paradox Memory KeyUser Codes Zone Programming Overview Entry DelayZone Programming Zone DefinitionsInstant/Stay Zones Delayed Fire ZonesFollow/Stay Zones Instant ZonesZone Options EOL End-Of-Line Zones Zones 15 and 16 become Hardwire ZonesAssigning Wireless Doorbells to the Console Wireless ProgrammingAssigning Wireless Zone Transmitters Deleting Assigned Wireless TransmittersSection Data refer to on User Assigning Remote ControlsProgramming the Remote Control’s Buttons Remote Control Button ProgrammingHexa Description Battery type One 3V lithium battery CR2032How to replace the battery StepArming and Disarming Exit Delay Termination Exit DelayBell Squawk on Arm/Disarm with Remote Control No Exit Delay when Arming with Remote ControlTamper Recognition Options Alarm OptionsBell Cut-off Timer Wireless Transmitter Supervision OptionsCheck-in Supervision Time Panic AlarmsPanic Alarm Types Panic Alarm KeysReport Codes Reporting and Dialer SettingsConsole Telephone Numbers Pager Telephone Number Service Telephone NumberConsole Account Number Central Station Telephone Numbers CSTNsAdemco Contact ID Reporting FormatsEvent Call Direction Standard Pulse FormatsAlternate Dial Option Delay Between Dialing AttemptsSwitch to Pulse Dialing on 5th Attempt Recent Close DelayDisarm Reporting Options Power Failure Report DelayZone Restore Report Options Auto-Test ReportProgrammable Outputs System Settings Trouble Description WinLoad Software Settings Appendix 1 Ademco Contact ID Report Code List Communication Troubles 350 Remote AccessAccess Control 420 Sounder Relay DisabledTest/Misc Communication Disables 550Modules Bypasses24Hr. Burglary Zones Bell Cut-off timerIndex NumericsNo Movement Auto-arming One-touch arming Closing Delinquency Timer Exit delay Exit Delay TerminationAnswering machine override Auto-arm optionsOverview, zone programming Delay before Alarm Report Code TransmissionTest report code Test Report, Automatic Timed Auto-arming Shutdown, Auto-zoneTelephone numbers Zone, hardwire Programming remote control buttonsDelay before Alarm Code Transmission Reference & Installation Manual Warranty Page Page MAGELLAN-EI01

MG-6060 specifications

The Magellan MG-6060 is a sophisticated GPS tracking device designed to enhance navigation and tracking capabilities for both individual users and businesses. With its advanced features and robust technology, the MG-6060 stands out in the market, catering to a diverse range of applications, including fleet management, personal tracking, and outdoor adventures.

One of the key highlights of the MG-6060 is its superior GPS accuracy. Utilizing a high-sensitivity GPS receiver, this device can provide precise location information, ensuring that users can track their assets in real time. Whether you’re managing a fleet of vehicles or keeping an eye on a loved one, the MG-6060 offers reliable tracking capabilities.

The device is equipped with cellular network communication, enabling seamless data transmission. This means that users can access their tracking information via a dedicated app or web platform, allowing for easy monitoring and management. The user-friendly interface of the accompanying software makes it simple to visualize tracking data, set up geofencing alerts, and receive real-time notifications.

Battery life is another important characteristic of the MG-6060. It features a long-lasting rechargeable battery that can provide extended usage times, making it suitable for various tracking applications. Users can enjoy the convenience of extended periods without needing a recharge, which is especially valuable in outdoor environments.

Durability is also a standout feature of the MG-6060. It is designed to withstand harsh conditions, making it perfect for rugged outdoor use. With an IP67 rating for water and dust resistance, the device can operate effectively in tough environments, ensuring that it remains functional regardless of the circumstances.

Moreover, the MG-6060 supports both GPS and GLONASS systems, offering enhanced satellite connectivity. This dual-constellation capability significantly improves positioning accuracy and reliability, especially in urban settings where tall buildings can obstruct satellite signals.

In summary, the Magellan MG-6060 stands out with its precise GPS tracking capabilities, user-friendly software, long battery life, and durable design. Its advanced features make it suitable for a variety of applications, positioning it as a versatile tool for effective tracking and navigation. Whether for personal use or business needs, the MG-6060 provides functionality that users can rely on in all situations.
Top Page Image Contents