IDP250 Installation Guide
Table 7: Management Port LEDs (continued)
LED | State | Description |
TX/RX | Orange | Connection is 1000 Mbps. |
| Green | Connection is 100 Mbps. |
| Off | If LINK indicates activity, TX/RX off indicates connection |
|
| is 10 Mbps. |
|
| If LINK indicates no activity, TX/RX off indicates no activity |
|
| as well. |
High Availability Interface Port
The high availability interface port is a 10/100/1000 Mbps Ethernet port. In the configuration and logs, the port is eth1. The high availability interface is a dedicated interface used to share state information among IDP appliances in a high availability cluster.
NOTE: IDP 5.0 does not support high availability.
Figure 3 on page 6 shows the management interface port LEDs.
Figure 3: High Availability Interface Port LEDs
Table 8 on page 6 describes the high availability interface port LED states.
Table 8: High Availability Port LEDs
LED | State | Description |
LINK | Glows green | Link is present. |
| Blinks green | Activity. |
| Off | No link is present. |