Kramer Electronics fc-42 user manual FC-42 Overview

Page 8

FC-42 – Overview

Figure 1: FC-42 Component to HD-SDI Converter Front Panel

	#			Feature			Function

1			POWER Switch			Illuminated switch for turning the unit ON or OFF

2			SETUP / MENU LCD Display			Displays the setup and the menu
3			MENU Button			Press to open the menu (see Section 6‎ .2)

4			ENTER Button			Press to load and save a set up, and to accept changes

5			 Button			Press to decrease numerical values or select from several definitions
6			 Button			Press to move up the menu list values
7			 Button			Press to increase numerical values or select from several definitions
8			 Button			Press to move down the menu list
9			LOCK Button			Press and hold for about 3 seconds to lock/unlock the front panel buttons

5
FC-42 - Overview	5

Image 8

Contents FC-42 Page Figures Introduction Getting Started Achieving the Best PerformanceSafety Instructions Recycling Kramer Products Overview Defining the FC-42 Component to HD-SDI ConverterFC-42 Overview FC-42 OverviewBNC Connector Installing in a Rack Connecting the FC-42 Connecting the FC-42 Component to HD-SDI Converter Connecting to the FC-42 via RS-232 Crossed Cable RS-232 ConnectionOperating the FC-42 HD-SDI to Component Converter Using the FC-42 Component To HD-SDI ConverterLocking the Front Panel SET … Standard AUTO, Forced Select Mode Menu Item Submenu SelectTechnical Specifications Communication Protocol Instruction ByteFollowing table defines the local parameter data Local Parameter Number Local Parameter Data DescriptionFollowing table defines the global parameter data Global Parameter Number Global Parameter Data DescriptionPage Safety Warning