MAINTENANCE
HAND VAC DIRT CUP & FILTER: CLEANING & REPLACEMENT
Dirt Cup Filter: FLTF
IMPORTANT: For best results empty the dirt cup and clean the filter after each use.
CLEANING INSTRUCTIONS
1Remove unit from storage base. (Fig. 6)
2Press dirt cup release to remove dirt cup. (Fig. 7)
3Grasp center rib in filter and pull to remove from cup. (Fig. 8)
4Empty dirt cup into trash bin. Either shake out or tap to clean. (Fig. 9)
5Replace filter. (Fig. 10)
6Align and
7Return unit to storage base.
NOTE: For best performance, replace filter every 6 months.
Fig. 6 | Fig. 7 | Fig. 8 |
Fig. 9 | Fig. 10 | Fig. 11 |
MAINTENANCE (cont.)
HAND VAC DIRT CUP & FILTER: CLEANING & REPLACEMENT
HAND VAC FILTER REPLACEMENT
1Remove filter as described in “Cleaning Instructions”.
2Twist the filter to separate it from the filter adapter. (Fig. 12)
3Keep the filter adapter and discard of old filter.
4Attach new filter to adapter. Twist to secure. (Fig. 13)
5Return to dirt cup and secure by aligning cut out in filter adapter to tab in dirt cup. (Fig. 14)
Fig. 12 | Fig. 13 | Fig. 14 |
!WARNING:
Discard the used bulb by following the recommended disposal procedure for a used fluorescent bulb. The bulb should only be used in the Germ Guardian™ Sanitizer unit and all instructions for use must be followed.
!WARNING: MISAPPLYING OR MISUSING THE
This product can be serviced or maintained only by changing the