First Alert N8891-1 manual Checking System Status, Press the Status Key, System Can Be Armed

Page 10

6(&85,1*￿7+(￿35(0,6(6

Checking System Status

General Information

Before arming your system, all protected doors, windows, and other protection zones must be closed or bypassed (see the BYPASSING PROTECTION section). Pressing the

STATUS

key will announce all zones that are faulted, as well as any other abnormal

system condition, making it easier for you to secure any open zones.

READY LIGHT: The green READY indicator on the keypad will be lit if the system is ready to be armed. If blinking, the system is not ready.

Press the STATUS Key

Press the

STATUS

key once to announce the general status of the system. The following

phrases may be heard depending on the current state of the system:

disarmed, ready to arm [message] [check system] disarmed, [not ready to arm], [message]

armed [away] [stay] [instant] [check system]

NOTE: Phrases in brackets are variable, and are announced only if appropriate in the current state of the system

Press the

STATUS

key twiceto announce specific system status. The following phrases

may be heard depending on the current state of the system:

fire alarm [zone voice descriptors] alarm [zone voice descriptors] fire fault [zone voice descriptors] fault [zone voice descriptors]

check system (indicates an RF Jam condition, communication failure [FC message], or keypad low battery condition; check the display for the specific condition occurring)

low battery [zone voice descriptors] system low battery

AC loss

zones bypassed

chime

(second press must be within 5 seconds of first press)

VOLUME LEVEL: The volume level of system announcements can be increased or decreased. Refer to the MESSAGE RECORDING/PLAYBACK section for the procedure.

System Can Be Armed

The READY light will be lit when all protection zones have been either closed or bypassed. You may now arm the system as usual.

– 10 –

Image 10
Contents 5HDG\*XDUG $%/2&217176 Features General InformationGeneral Operation 48,&.9,2667081&7,216 About the Master Keypad GeneralAbout the Display and Indicators LED MeaningsMaster Keypad Definitions 66702959 Press the Status Key Checking System StatusSystem Can Be Armed Arming In Away Mode Arming in Stay ModeArming the System To arm with no Delay if Quick Arm is active Arming the System With No DelayTo arm with no Delay Quick ArmingEntry Delay Entry/Exit DelaysExit Delay Exit Alarms Exit Alarm ActiveTo disarm the system and silence burglary alarms * * * * + Memory of AlarmDisarming the System Quick Bypass Bypassing Protection ZonesBypassing Individual Zones Displaying Bypassed ZonesChime Mode Panic Keys / Chime ModePanic Keys Code Format Paging FeatureAutomatic Paging Manual PagingUsing Device Commands Lights On/Lights Off Keys Device DescriptionsRecording a Message Message Recording/Playback/Volume ControlAdjusting the Volume Message PlaybackDefining the AUX Function Performing the AUX functionSetting the Time and Date Clock/CalendarSilencing a Fire Alarm If InstalledCase of Fire National Fire Protection Assn./Smoke Detectors Living Room BedroomEmergency Evacuation To Add/Delete a User or Change a Users Code Security CodesAdd a user code Delete a user code Exit Test Mode Testing the System to be conducted weeklyEntering Test Mode Enter the security code then press TestTypical Trouble Condition Displays Trouble MessagesRoutine Care Changing the System Battery Low Battery Conditions in Wireless SensorsMaintaining your system 6XPPDU\2I$XGLEOH1RWLILFDWLRQ UL Notice This is a Grade a residential system Federal Communications Commission FCC Part 68 Notice Canadian Department of Communications DOC Statement Owners Insurance Premium Credit Request Owners Insurance Premium Credit Request Servicing Information 6, 7 10, 14 ²1276² Limitations of this Alarm System ¬1%l

N8891-1 specifications

The First Alert N8891-1 is a technologically advanced smoke and carbon monoxide (CO) alarm that exemplifies safety and efficiency for modern homes. Designed to provide comprehensive protection against two of the most hazardous threats in residential environments, this device is engineered with an array of features that enhance its functionality and user-friendliness.

One of the standout features of the N8891-1 is its dual-sensor technology. This method combines both photoelectric and ionization sensing capabilities, allowing the alarm to effectively detect a wide range of fire types. Photoelectric sensors are particularly effective for smoldering fires, which may produce more smoke and take longer to ignite, while ionization sensors quickly respond to flaming fires. This combination ensures that users receive timely warnings, enhancing safety and increasing the chances of escape.

The First Alert N8891-1 is also equipped with a unique, easy-to-read digital display that provides real-time data about CO levels in the home. This feature is crucial, as carbon monoxide is an odorless and colorless gas that can be extremely harmful, if not fatal. The display not only indicates the current CO level but also provides users with alerts in case of an emergency or when the battery is low.

In addition to its advanced sensing capabilities, the N8891-1 includes a 10-year sealed battery, eliminating the need for frequent battery replacements and ensuring long-lasting performance. This feature provides peace of mind, knowing that the device will remain operational without the hassle of upkeep.

Another important characteristic is the alarm’s ability to interlink with other compatible smoke alarms in the household. When one alarm detects smoke or CO, all linked units will sound off, creating a synchronized response that further enhances safety throughout the home.

Furthermore, the First Alert N8891-1 is designed with user convenience in mind, featuring a single button for both testing the alarm and silencing false alarms, which can often occur when cooking or from other non-threatening sources.

Overall, the First Alert N8891-1 stands out as a reliable and sophisticated choice for those seeking to enhance their home’s safety features with a dual-function smoke and carbon monoxide detector that seamlessly combines advanced technology, ease of use, and sustainability.