First Alert N8891-1 manual Defining the AUX Function, Performing the AUX function

86(5￿)81&7,216

AUX FUNCTION

General Information

The

AUX

key may have been programmed to either perform a predefined function or to

send a preset message to a pager (see PAGER FEATURE section for pager operation). Ask your installer which function has been assigned for your system.

AUX

Key: PRE-DEFINED FUNCTION PAGING FUNCTION

If programmed for the AUX function, you can use the

AUX

key to activate a string of up

to 20 keystrokes that have been stored in the system’s memory. Typical functions include:

∙Seldom used but repeatable sequences

∙Arming sequences that involve bypassing zones before arming

∙Device activation sequences

Defining the AUX Function

The system must be disarmed before defining a function.

1.Enter Master Code + # + AUX (hold down until 4 beeps sound).

2.Press the desired command sequence, up to 20 keystrokes. Press the between each command in the sequence.

3.Press the AUX key twice to end the definition.

AUX

key

For example, to bypass Zones 10 and 11 and arm AWAY with NO DELAY, enter the following string:

Master Code + # +

AUX

(hold until 4 beeps sound), then 6 10 11 AUX AWAY 0 AUX AUX

Note that the

AUX

key is included in the 20 keystroke maximum.

Performing the AUX function

Press and hold down the AUX key at least 2 seconds until 4 beeps sound, then enter your security code. The defined function will begin.

– 20 –