First Alert N8891-1 manual Arming the System With No Delay, Quick Arming, To arm with no Delay

Page 12

6(&85,1*￿7+(￿35(0,6(6

Arming the System

Arming the System With No Delay

Use NO DELAY with STAY mode when you are staying home and do not expect anyone to use the entrance door.

Use NO DELAY with AWAY mode when the premises will be vacant for extended periods of time such as vacations, etc.

When armed with NO DELAY, the system will sound an alarm if a protected door or window is opened, including the entrance door. You may leave through the entrance door during the exit delay period without causing an alarm, but an alarm will sound as soon as someone reenters.

To arm with NO DELAY:

+

Your security code**

AWAY

or

STAY

+

NO DELAY

** See Quick Arming paragraph.

Quick Arming

If Quick Arm was programmed by the installer, you do not need to enter the security code to arm the system. Instead, simply press and hold down the desired arming key for at least 2 seconds. The security code must always be used to disarm the system, however.

To arm if Quick Arm is active:

AWAY or STAY

hold down for at least 2 seconds

To arm with NO DELAY if Quick Arm is active:

AWAY or STAY then NO DELAY

hold down for at least 2 seconds

IMPORTANT: The Babysitter Code and Installer Code cannot disarm the system unless it was used to arm the system. In addition, if the system is armed by pressing and holding the Quick-Arm buttons, neither the Babysitter Code nor Installer Code can disarm the system.

– 12 –

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 5HDG\*XDUG $%/2&217176 Features General InformationGeneral Operation 48,&.9,2667081&7,216 About the Master Keypad GeneralAbout the Display and Indicators LED MeaningsMaster Keypad Definitions 66702959 Checking System Status Press the Status KeySystem Can Be Armed Arming in Stay Mode Arming In Away ModeArming the System Arming the System With No Delay To arm with no DelayTo arm with no Delay if Quick Arm is active Quick ArmingEntry/Exit Delays Exit DelayEntry Delay Exit Alarms Exit Alarm ActiveMemory of Alarm To disarm the system and silence burglary alarms * * * * +Disarming the System Bypassing Protection Zones Bypassing Individual ZonesQuick Bypass Displaying Bypassed ZonesPanic Keys / Chime Mode Chime ModePanic Keys Paging Feature Automatic PagingCode Format Manual PagingUsing Device Commands Lights On/Lights Off Keys Device DescriptionsMessage Recording/Playback/Volume Control Adjusting the VolumeRecording a Message Message PlaybackDefining the AUX Function Performing the AUX functionSetting the Time and Date Clock/CalendarIf Installed Silencing a Fire AlarmCase of Fire National Fire Protection Assn./Smoke Detectors Living Room BedroomEmergency Evacuation Security Codes To Add/Delete a User or Change a Users CodeAdd a user code Delete a user code Testing the System to be conducted weekly Entering Test ModeExit Test Mode Enter the security code then press TestTrouble Messages Typical Trouble Condition DisplaysRoutine Care Low Battery Conditions in Wireless Sensors Changing the System BatteryMaintaining your system 6XPPDU\2I$XGLEOH1RWLILFDWLRQ UL Notice This is a Grade a residential system Federal Communications Commission FCC Part 68 Notice Canadian Department of Communications DOC Statement Owners Insurance Premium Credit Request Owners Insurance Premium Credit Request Servicing Information 6, 7 10, 14 ²1276² Limitations of this Alarm System ¬1%l

N8891-1 specifications

The First Alert N8891-1 is a technologically advanced smoke and carbon monoxide (CO) alarm that exemplifies safety and efficiency for modern homes. Designed to provide comprehensive protection against two of the most hazardous threats in residential environments, this device is engineered with an array of features that enhance its functionality and user-friendliness.

One of the standout features of the N8891-1 is its dual-sensor technology. This method combines both photoelectric and ionization sensing capabilities, allowing the alarm to effectively detect a wide range of fire types. Photoelectric sensors are particularly effective for smoldering fires, which may produce more smoke and take longer to ignite, while ionization sensors quickly respond to flaming fires. This combination ensures that users receive timely warnings, enhancing safety and increasing the chances of escape.

The First Alert N8891-1 is also equipped with a unique, easy-to-read digital display that provides real-time data about CO levels in the home. This feature is crucial, as carbon monoxide is an odorless and colorless gas that can be extremely harmful, if not fatal. The display not only indicates the current CO level but also provides users with alerts in case of an emergency or when the battery is low.

In addition to its advanced sensing capabilities, the N8891-1 includes a 10-year sealed battery, eliminating the need for frequent battery replacements and ensuring long-lasting performance. This feature provides peace of mind, knowing that the device will remain operational without the hassle of upkeep.

Another important characteristic is the alarm’s ability to interlink with other compatible smoke alarms in the household. When one alarm detects smoke or CO, all linked units will sound off, creating a synchronized response that further enhances safety throughout the home.

Furthermore, the First Alert N8891-1 is designed with user convenience in mind, featuring a single button for both testing the alarm and silencing false alarms, which can often occur when cooking or from other non-threatening sources.

Overall, the First Alert N8891-1 stands out as a reliable and sophisticated choice for those seeking to enhance their home’s safety features with a dual-function smoke and carbon monoxide detector that seamlessly combines advanced technology, ease of use, and sustainability.
Top Page Image Contents