Ironman Fitness V2 instruction manual Adjusting The Detection Sensitivity, Once in test mode, Off

Page 22

Walk Test Mode for the Passive Infrared detectors and other wireless devices

It is vital that the detector is tested carefully for each installation. At 25°Celsius, the detector should have a detection range of approximately 10 metres and a scope angle of 90°, i.e. 45° either side of the centre position straight ahead of the lens.

Walk Test Mode For The Wireless PIR Detectors

1.

2.

3.

Remove the front cover off the detector via the clip at the top. The green and red lights will flash together, 6 times, to indicate that the detector has entered test mode.

Replace the front cover.

The detector will stay in walk test mode for 3 minutes. It may be triggered as often as desired during this period.

Once in test mode

Now the detector can be triggered constantly for the next 3 minutes. Walk past the detector to test the detection range. When movement is detected the green light will flash to indicate one pulse count. When 3 pulse counts are detected the red light will flash to indicate a valid movement and that the alarm code signal has been sent back to the main control unit.

Adjusting The Detection Sensitivity

 

 

PULSE COUNT SELECT Jumper

 

 

 

 

 

 

 

 

ON

Least sensitive – 3 pulse counts

 

 

 

 

 

 

 

 

OFF

Most sensitive – 2 pulse counts

 

 

 

The sensitivity of the detector can be changed by either

 

 

 

removing the ‘Pulse Count Select’ jumper or by placing it

 

 

 

across both pins. When the jumper is placed across both

 

 

 

pins (default), then the detector is set to 3 pulse counts

 

Pulse count jumper

 

(least sensitive). When the jumper is removed or only

 

 

 

 

 

attached to 1 of the pins, then the detector is set to 2 pulse

 

 

 

counts (most sensitive).

 

 

 

Once you have set the jumper, you must press the tamper

 

 

 

switch in for 1 second then release it for the setting to

 

 

 

become active. Now you can place the front cover back on

 

Tamper switch

 

the detector.

 

 

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Watchguard Digital Contents Monitoring Service Standard Agreement Watchguard Digital Features Include IntroductionPage Wireless Keypad Optional ComponentsGeneral System Description Watchguard Digital BACK-TO-BASE Monitored Alarm SystemStandard System Components 1x Wireless External High Power Siren and Strobe General Terms Of Sale KEY Features of the Digital Monitoring CentreRequirements Home Plan Monitoring Service PlansDefault setting Home Plan Business PlanCost of the Business Plan is $34.90 per month including GST Monitoring Plan CostsCost of the Home Plan is $29.90 per month including GST Cost of the Basic Plan is $12.90 per month including GSTChanging System Settings Automated Billing ProcedureOptional Alarm Patrol Guard Response Planning the Installation Installation SequencePage Install The Main Control Unit Installing the Main Control UnitTo Change Between HOME, Business & Basic Plans Installing the Wireless PIR Detectors Install the Wireless PIR DetectorsZone About The Wireless Passive Infrared Detector Pirw Tips for positioningPage Plastic under battery Powering the DetectorWarm up period Pulse Count Select Jumper Adjusting The Detection SensitivityOnce in test mode OFFDetection pattern in the optimal temperature environment Dual Edge Sensing DES technology ‘explained’Triggering the detector when set to most sensitive Triggering the detector when set to least sensitiveDefault setting TOP ViewNo trigger body movements No triggerInstalling The External Siren Installing the Siren Unit Wireless Siren Auto Test Step A- Register Your Alarm System Connecting To The SecureNet Digital Monitoring CentreStep B Add your account details Step C Add your contact details Step D- Login to the SecureNet Digital Monitoring Centre Step E- Set Up My Sensors Step G- Test Your Account Table Of Transmitted Alarm Messages Message DescriptionMessage Format Exit & Entry Delays Red LED Indicator Main Control UnitMaster Key switch On Main Control Unit Entry Delay For Use With The Optional Wireless KeypadWhen to use Away ModeStay Mode Panic Mode Stay mode Remote Control FunctionsAway mode Panic modeTo ADD a NEW Remote ADDSeconds System will automatically enter Walk Test modeNumber of times of the zone that the detector has To Delete a Detector DeleteZone Feature Programming Zone Feature ProgrammingWireless Siren Auto Test Delete ADDMain Control Unit Backup Battery Real Time Clock batteryMain Control Unit Battery Replacement Procedure Wireless PIR Detector Battery Specifications Remote ControlWireless PIR Detector Replacing the BatteriesCleaning the Case and Lens Cleaning the Pyro SensorWireless External Siren Backup Battery If I accidentally set off my system, what should I do? Frequently Asked Questions FAQWhat should I do if my system develops a fault? Is there anything I need to do before I go on holidays?Page Page Limited Warranty Monitoring Service Standard Agreement InterpretationLimiting of Liability and Indemnity Fees & Charges PIR Name Address Suburb State Postcode Country Purchase DatePlease make any comments you have here

V2 specifications

Ironman Fitness V2 is an innovative fitness equipment solution designed to elevate your workout experience and help you achieve your fitness goals. This machine is not just another piece of gym equipment; it’s a comprehensive home gym that brings versatility, functionality, and advanced technology right into your living space.

One of the standout features of Ironman Fitness V2 is its compact and space-saving design. Unlike traditional gym setups that can consume a significant amount of space, this unit is designed to fit comfortably in smaller areas. This makes it an excellent choice for home gyms, apartments, or any fitness enthusiast looking to maximize their workout space without sacrificing quality.

The Ironman Fitness V2 is equipped with a multi-function adjustable bench that caters to various exercises, from weightlifting to bodyweight workouts. The adjustable settings allow users to perform a wide array of exercises, including bench presses, shoulder presses, and leg lifts. This flexibility is crucial for anyone looking to diversify their workout routine.

Incorporating the latest technologies, the Ironman Fitness V2 features a digital display that tracks vital workout metrics, such as time, reps, and calories burned. This real-time feedback helps users monitor their performance and stay motivated. It also enables individuals to set specific fitness goals and track their progress efficiently.

Safety and comfort are paramount in the design of the Ironman Fitness V2. The unit is constructed from durable, high-quality materials that can withstand rigorous use. Additionally, it includes padded seats and backrests for enhanced comfort during workouts, reducing the risk of injury.

Another significant characteristic of the Ironman Fitness V2 is its ease of assembly and portability. The unit can be quickly set up and disassembled, making it convenient for those who may need to relocate their equipment. The incorporation of wheels allows for easy transport, ensuring you can move it as needed within your space.

In summary, Ironman Fitness V2 is more than just fitness equipment; it’s a multi-functional home gym that combines innovative design, advanced technology, and user-friendly features. With its compact size, versatile capabilities, and focus on safety and comfort, the Ironman Fitness V2 is an excellent choice for anyone looking to elevate their fitness journey from the comfort of their own home. Whether you’re a beginner or a seasoned athlete, this equipment can help you push your limits and achieve your fitness aspirations.
Top Page Image Contents