Ironman Fitness V2 Install The Main Control Unit, Installing the Main Control Unit

Page 15

Step 1: Install The Main Control Unit

The Main Control Unit requires both AC power and a phone line to be plugged in. Therefore, it should be located as close as possible to a power and phone outlet and preferably mounted out of sight. For maximum wireless range, mount the unit at a height of 1.5m or greater from the floor, and ensure there are no metal objects directly adjacent to the antenna.

Note: Make the antenna as straight as possible, as even small bends can reduce the wireless range significantly. DO NOT ever attempt to shorten or lengthen the antenna.

Antenna – Keep vertical & straight

Installing the Main Control Unit

1.Drill mounting holes (7mm Diameter) into the chosen location (preferably 1.5m or greater from the floor).

2.Once installed, the antenna on the back of the main control unit must be straightened so that it is vertical.

3.Push the supplied wall plugs into the holes then mount the unit on the wall using the supplied screws.

4.Plug the power adapter (with the right angle plug) into your power point (leaving it switched off), and connect the right angle plug into the Main Control Unit.

5.Connect your phone line via the line socket using the lead provided. If using a regular phone from the same wall socket, connect it to the phone socket.

6.Turn the power point on where the power adapter is connected.

7.Prepare to select billing plan if you intend to change the plan (Default: Home Plan)

8.If there is no change to the monitoring plan, Turn the master key switch on the main control unit to the on position.

The Watchguard Digital has been designed with most single & two storey residential / business premises in mind. In some instances however, (due to the construction of the building) range may be diminished, and this may require you to locate either the main control unit, the external siren, or the alarm detector closer to one another to achieve reliable performance. Carrying out Auto Siren test (Refer Page 45) and Walk Test (Refer Page 43) will ensure best operation.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Watchguard Digital Contents Monitoring Service Standard Agreement Introduction Watchguard Digital Features IncludePage Optional Components Wireless KeypadWatchguard Digital BACK-TO-BASE Monitored Alarm System General System DescriptionStandard System Components 1x Wireless External High Power Siren and Strobe KEY Features of the Digital Monitoring Centre General Terms Of SaleRequirements Business Plan Monitoring Service PlansDefault setting Home Plan Home PlanCost of the Basic Plan is $12.90 per month including GST Monitoring Plan CostsCost of the Home Plan is $29.90 per month including GST Cost of the Business Plan is $34.90 per month including GSTAutomated Billing Procedure Changing System SettingsOptional Alarm Patrol Guard Response Installation Sequence Planning the InstallationPage Installing the Main Control Unit Install The Main Control UnitTo Change Between HOME, Business & Basic Plans Install the Wireless PIR Detectors Installing the Wireless PIR DetectorsZone Tips for positioning About The Wireless Passive Infrared Detector PirwPage Powering the Detector Plastic under batteryWarm up period OFF Adjusting The Detection SensitivityOnce in test mode Pulse Count Select JumperDual Edge Sensing DES technology ‘explained’ Detection pattern in the optimal temperature environmentTOP View Triggering the detector when set to least sensitiveDefault setting Triggering the detector when set to most sensitiveNo trigger No trigger body movementsInstalling The External Siren Installing the Siren Unit Wireless Siren Auto Test Connecting To The SecureNet Digital Monitoring Centre Step A- Register Your Alarm SystemStep B Add your account details Step C Add your contact details Step D- Login to the SecureNet Digital Monitoring Centre Step E- Set Up My Sensors Step G- Test Your Account Message Description Table Of Transmitted Alarm MessagesMessage Format Entry Delay For Use With The Optional Wireless Keypad Red LED Indicator Main Control UnitMaster Key switch On Main Control Unit Exit & Entry DelaysAway Mode When to useStay Mode Panic Mode Panic mode Remote Control FunctionsAway mode Stay modeADD To ADD a NEW RemoteSystem will automatically enter Walk Test mode SecondsNumber of times of the zone that the detector has Delete To Delete a DetectorZone Feature Programming Zone Feature ProgrammingDelete ADD Wireless Siren Auto TestReal Time Clock battery Main Control Unit Backup BatteryMain Control Unit Battery Replacement Procedure Replacing the Batteries Remote ControlWireless PIR Detector Wireless PIR Detector Battery SpecificationsCleaning the Pyro Sensor Cleaning the Case and LensWireless External Siren Backup Battery Is there anything I need to do before I go on holidays? Frequently Asked Questions FAQWhat should I do if my system develops a fault? If I accidentally set off my system, what should I do?Page Page Limited Warranty Interpretation Monitoring Service Standard AgreementLimiting of Liability and Indemnity Fees & Charges Name Address Suburb State Postcode Country Purchase Date PIRPlease make any comments you have here

V2 specifications

Ironman Fitness V2 is an innovative fitness equipment solution designed to elevate your workout experience and help you achieve your fitness goals. This machine is not just another piece of gym equipment; it’s a comprehensive home gym that brings versatility, functionality, and advanced technology right into your living space.

One of the standout features of Ironman Fitness V2 is its compact and space-saving design. Unlike traditional gym setups that can consume a significant amount of space, this unit is designed to fit comfortably in smaller areas. This makes it an excellent choice for home gyms, apartments, or any fitness enthusiast looking to maximize their workout space without sacrificing quality.

The Ironman Fitness V2 is equipped with a multi-function adjustable bench that caters to various exercises, from weightlifting to bodyweight workouts. The adjustable settings allow users to perform a wide array of exercises, including bench presses, shoulder presses, and leg lifts. This flexibility is crucial for anyone looking to diversify their workout routine.

Incorporating the latest technologies, the Ironman Fitness V2 features a digital display that tracks vital workout metrics, such as time, reps, and calories burned. This real-time feedback helps users monitor their performance and stay motivated. It also enables individuals to set specific fitness goals and track their progress efficiently.

Safety and comfort are paramount in the design of the Ironman Fitness V2. The unit is constructed from durable, high-quality materials that can withstand rigorous use. Additionally, it includes padded seats and backrests for enhanced comfort during workouts, reducing the risk of injury.

Another significant characteristic of the Ironman Fitness V2 is its ease of assembly and portability. The unit can be quickly set up and disassembled, making it convenient for those who may need to relocate their equipment. The incorporation of wheels allows for easy transport, ensuring you can move it as needed within your space.

In summary, Ironman Fitness V2 is more than just fitness equipment; it’s a multi-functional home gym that combines innovative design, advanced technology, and user-friendly features. With its compact size, versatile capabilities, and focus on safety and comfort, the Ironman Fitness V2 is an excellent choice for anyone looking to elevate their fitness journey from the comfort of their own home. Whether you’re a beginner or a seasoned athlete, this equipment can help you push your limits and achieve your fitness aspirations.
Top Page Image Contents