Ironman Fitness V2 instruction manual Message Format

Page 36

 

This means that a serious problem has occurred and your

System Shutdown

system has had to shut down. Please contact your installer

 

immediately or SecureNet on 1300 653 533

 

 

 

Your alarm panel has failed when it called the 1900 number

 

for your monthly billing. Check that the phone line is

Billing Failed

plugged in, there is a dial tone on the line and that your line

 

is enabled to call 1900 and 1300 numbers. Your control

 

panel will not work until your billing is successful.

 

 

High Level Radio Interference

System is experiencing a high level of interference, which

may prevent normal alarm activation.

 

 

 

External Siren Reboot

The external siren has been turned off and back on again

 

 

 

There has been no power supplied to the External Siren for

External Siren Power Loss

15minutes. The External siren is running off the backup

 

battery

 

 

 

The External Siren’s back up battery is outside normal

External Siren Battery Fail

operating conditions and may be unable to run correctly in

 

the event of Main power loss.

 

 

External Siren Supervision fail

The External Siren has failed to communicate with the main

control unit for 24hours

External Siren Tamper

The Tamper switch on the external siren has changed

state. I.e. the siren has been removed from the wall.

 

 

 

If your alarm system is unable to contact the SecureNet DIGITAL MONITORING CENTRE it will retry to send the message five more times at 25 second intervals. If unable to send the message after these attempts, the message will be lost, so it is important to ensure that your phone line is always connected to your alarm panel.

Message Format

The notification messages contain the following information:

Message

Date: The time and the date when the message is sent.

Detail: Provides the area, zone and event that caused the message to be sent

Account

Name: The name of the premises where the alarm is installed.

Address: The address of the premises.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Watchguard Digital Contents Monitoring Service Standard Agreement Watchguard Digital Features Include IntroductionPage Wireless Keypad Optional ComponentsWatchguard Digital BACK-TO-BASE Monitored Alarm System General System DescriptionStandard System Components 1x Wireless External High Power Siren and Strobe KEY Features of the Digital Monitoring Centre General Terms Of SaleRequirements Monitoring Service Plans Default setting Home PlanHome Plan Business PlanMonitoring Plan Costs Cost of the Home Plan is $29.90 per month including GSTCost of the Business Plan is $34.90 per month including GST Cost of the Basic Plan is $12.90 per month including GSTAutomated Billing Procedure Changing System SettingsOptional Alarm Patrol Guard Response Planning the Installation Installation SequencePage Install The Main Control Unit Installing the Main Control UnitTo Change Between HOME, Business & Basic Plans Installing the Wireless PIR Detectors Install the Wireless PIR DetectorsZone About The Wireless Passive Infrared Detector Pirw Tips for positioningPage Powering the Detector Plastic under batteryWarm up period Adjusting The Detection Sensitivity Once in test modePulse Count Select Jumper OFFDetection pattern in the optimal temperature environment Dual Edge Sensing DES technology ‘explained’Triggering the detector when set to least sensitive Default settingTriggering the detector when set to most sensitive TOP ViewNo trigger body movements No triggerInstalling The External Siren Installing the Siren Unit Wireless Siren Auto Test Step A- Register Your Alarm System Connecting To The SecureNet Digital Monitoring CentreStep B Add your account details Step C Add your contact details Step D- Login to the SecureNet Digital Monitoring Centre Step E- Set Up My Sensors Step G- Test Your Account Table Of Transmitted Alarm Messages Message DescriptionMessage Format Red LED Indicator Main Control Unit Master Key switch On Main Control UnitExit & Entry Delays Entry Delay For Use With The Optional Wireless KeypadAway Mode When to useStay Mode Panic Mode Remote Control Functions Away modeStay mode Panic modeTo ADD a NEW Remote ADDSystem will automatically enter Walk Test mode SecondsNumber of times of the zone that the detector has To Delete a Detector DeleteZone Feature Programming Zone Feature ProgrammingWireless Siren Auto Test Delete ADDReal Time Clock battery Main Control Unit Backup BatteryMain Control Unit Battery Replacement Procedure Remote Control Wireless PIR DetectorWireless PIR Detector Battery Specifications Replacing the BatteriesCleaning the Pyro Sensor Cleaning the Case and LensWireless External Siren Backup Battery Frequently Asked Questions FAQ What should I do if my system develops a fault?If I accidentally set off my system, what should I do? Is there anything I need to do before I go on holidays?Page Page Limited Warranty Monitoring Service Standard Agreement InterpretationLimiting of Liability and Indemnity Fees & Charges Name Address Suburb State Postcode Country Purchase Date PIRPlease make any comments you have here

V2 specifications

Ironman Fitness V2 is an innovative fitness equipment solution designed to elevate your workout experience and help you achieve your fitness goals. This machine is not just another piece of gym equipment; it’s a comprehensive home gym that brings versatility, functionality, and advanced technology right into your living space.

One of the standout features of Ironman Fitness V2 is its compact and space-saving design. Unlike traditional gym setups that can consume a significant amount of space, this unit is designed to fit comfortably in smaller areas. This makes it an excellent choice for home gyms, apartments, or any fitness enthusiast looking to maximize their workout space without sacrificing quality.

The Ironman Fitness V2 is equipped with a multi-function adjustable bench that caters to various exercises, from weightlifting to bodyweight workouts. The adjustable settings allow users to perform a wide array of exercises, including bench presses, shoulder presses, and leg lifts. This flexibility is crucial for anyone looking to diversify their workout routine.

Incorporating the latest technologies, the Ironman Fitness V2 features a digital display that tracks vital workout metrics, such as time, reps, and calories burned. This real-time feedback helps users monitor their performance and stay motivated. It also enables individuals to set specific fitness goals and track their progress efficiently.

Safety and comfort are paramount in the design of the Ironman Fitness V2. The unit is constructed from durable, high-quality materials that can withstand rigorous use. Additionally, it includes padded seats and backrests for enhanced comfort during workouts, reducing the risk of injury.

Another significant characteristic of the Ironman Fitness V2 is its ease of assembly and portability. The unit can be quickly set up and disassembled, making it convenient for those who may need to relocate their equipment. The incorporation of wheels allows for easy transport, ensuring you can move it as needed within your space.

In summary, Ironman Fitness V2 is more than just fitness equipment; it’s a multi-functional home gym that combines innovative design, advanced technology, and user-friendly features. With its compact size, versatile capabilities, and focus on safety and comfort, the Ironman Fitness V2 is an excellent choice for anyone looking to elevate their fitness journey from the comfort of their own home. Whether you’re a beginner or a seasoned athlete, this equipment can help you push your limits and achieve your fitness aspirations.
Top Page Image Contents