Hearth and Home Technologies QV36B-A owner manual Log Set Assembly LOGS-2014 Model QV32B-A

F. Install the Log Assembly

If the gas logs have been factory installed they should not need to be positioned. If the logs have been packaged separately, refer to the following instructions.

Log Set Assembly: LOGS-2014 Model: QV32B-A

1	2	4	5
		3

1

STEP 1: Carefully remove the logs from the packaging.

CAUTION: Logs are fragile!

STEP 2: LOG #1 (SRV2014-701): Place log # 1 cen- tered on the grate and pushed against the back of firebox.

2

3

STEP 3: LOG #2 (SRV2014-703): Place log # 2 with the left tip of the log on the flat spot on the burner and the right end pulled forward against grate.

STEP 4: LOG #3 (SRV2014-702): Place burned area of log #3 on the flat spot on the burner, and knob on log resting on grate.

4

3 1

5

1 2

STEP 5: LOG #4 (SRV780-707): Place log #4 across log #3 and resting on log #1.

STEP 6: LOG #5 (SRV2014-704): Place log #5 on log #1 and log #2 with burned area facing burner.

2014-925B 6/03

Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev. U • 1/12 55