| ‘DEL’ first, then click the time period block. |
Events | Select the event to trigger recording: |
| |
| (according to schedule). |
| Motion Detection: Recording is |
| |
| DI Input: Recording is activated by DI (Digital |
| Input) signal located on IP camera. IP camera |
| must have DI port and not every IP camera is |
| equipped with DI. |
Dedicated Schedule | If you just want to add a new recording |
| schedule between certain time and this |
| schedule will only happen once but not every |
| week, you can use this function to specify a |
| time period. |
| Select ‘Start’ and ‘End’ date / time, and click |
| ‘Add/Modify’ button to add the time period to |
| the list. You can also select an existing time |
| period and make changes, and click ‘Add / |
| Modify’ button to save changes. |
| To remove an existing schedule, select an |
| existing schedule, and then click ‘Remove’ |
| button. |
Comment | You can input some text to help you to |
| memorize the purpose of this schedule |
Cameras/Devices | Check all IP cameras that will be activated by |
| this schedule. |
Add to list | Click this button to add this schedule to the list. |
When you finishes setting, click ‘OK’ button to save changes you made, or click ‘Cancel’
button to discard all settings you made.
4-3-5 Event
86