Card

Item	Description
Enable Setting	Check this box to enable this event. If you just want to disable this event
	temporarily, you can uncheck this box to keep this event and disabling
	while not deleting it.
Title	Input any description text for this event so you can identify it quickly.
	You can use alphabets, numbers, and symbols include: !$-.@^_~ (no
	spaces allowed).
Motion	Check this box and this event will be activated when one of motion
Detection	detection window detects motion.
Digital Input	Check this box and this event will be activated when digital input 1 or 2’s
1 ~ 2	input signal is high or low (select from dropdown list).
Enable	Check this box and this event will be activated when designated
Schedule Time	weekday and time is reached.
	You also have to check weekday box, and select time from dropdown
	list. If you select ‘Always’ as time, this event will be activated during all
	the day.
Enable FTP	Check this box and IP camera will save file on FTP server (refer to ‘FTP
	Server’ setting in ‘Event Server’ tab) when this event is activated.
Enable EMAIL	Check this box and IP camera will send an Email to designated recipient
	address (refer to ‘SMTP Server’ setting in ‘Event Server’ tab) when this
	event is activated.
Enable Samba	Check this box and IP camera will save file on samba server (refer to
(Net Storage)	‘Samba Server’ setting in ‘Event Server’ tab) when this event is activated.
Enable SD	Check this box and IP camera will save file on SD card when this event is
CARD	activated. A working SD card must be inserted into IP camera in
	advance.
Trigger digital	Check this box and IP camera will trigger digital out to ‘high’ state for xx
output for xx	seconds when this event is activated, where ‘xx’ seconds must be
second(s).	defined by the dropdown list.

Description