Water Piping

Installation Instructions (cont'd)

_WARNING

HOTTER WATER CAN SCALD: Water heaters are intended to produce hot water. Water heated to a tem-

perature which will satisfyspaceheating, clotheswashing, dish washing, and other sanitizing needs can scald and

permanently injure you upon contact. Some people are more likely to be permanently injured by hot water than

others. These include the eldedy, children, the infirm, or physically/mentally handicapped. If anyone using hot water in your home fits into one of these groups or if there is a local code or state law requiring a certain tem- perature water at the hot water tap, then you must take specialprecautions. In addition to using the lowest possi- ble temperature setting that satisfies your hot water needs, a means such as a mixing valve, shall be used at the hot water taps used by these people or at the water

heater. Mixing valvesare available at plumbing supply or hardware stores. Follow manufacturers instructions for

installation of the valves.Before changingthe factory set- ting on the thermostat, read the "Temperature

Regulation"section in this manual.

The illustration shows the attachment of the water piping to the water heater. The water heater is equipped with ¾ water

connections.

If a water heater is installed in a closed water supply system; such as one having a back-flow preventer, check valve, water meter with a check valve, etc. in the cold water supply; means shall be provided to control thermal expansion. Contact the local utility or local Sears Service Center on how to control this situation.

Installation completed using Sears

Installation Kit

FLEXIBLE

WATERSHUT-OFF

CONNECTORSVALVE

HOT OUTLET	_		COLD	INLET
TO HOUSE			WATER	LINE
THREADED		TO	THREADED TO
SWEAT	COUPLING "		SWEAT COUPLING

TEMPERATURE-

PRESSURE

RELIEF VALVE

--DISCHARGE PIPE

(Do not cap or plug)

NOTE: If using copper tubing, solder tubing to an adapter before attaching the adapter to the cold water inlet connec- tion. Do not solder the cold water supply line directly to the

cold water inlet. It will harm the dip tube and damage the tank.

•Look at the top cover of the water heater. The water outlet is marked hot. Put two or three turns of teflon tape around the

threaded end of the threaded-to-sweat coupling and around both ends of the %" threaded nipple. Using flexible connec-

tors, connect the hot water pipe to the hot water outlet of the water heater.

•Look at the top cover of the water heater. The cold water inlet is marked cold. Put two or three turns of teflon tape around

the threaded end of the threaded-to-sweat coupling and around both ends of the %" threaded nipple. Using flexible

connectors, connect the cold water pipe to the cold water inlet of the water heater.

NOTE: Your water heater is super insulated to minimize heat loss from the tank. Further reduction in heat loss can be

accomplished by insulating the hot water lines from the water heater.

6" AIR GAP

iJ FLOOR DRAIN

153.320891 HT 82 GAL, 153.320690 HT 66 GAL, 153.320490 HT 40 GAL, 153.320591 HT 50 GAL, 153.320491 HT 40 GAL specifications

The Kenmore line of water heaters includes a range of models designed to meet varying needs in both residential and commercial settings. Among the noteworthy products in this lineup are the Kenmore 153.320590 HT 50 GAL, 153.320491 HT 40 GAL, 153.320890 HT 82 GAL, 153.320591 HT 50 GAL, and 153.320891 HT 82 GAL. Each model possesses unique features, technologies, and characteristics that cater to different user requirements.

The Kenmore 153.320590 HT 50 GAL and 153.320591 HT 50 GAL models are designed for efficient hot water delivery in households that require a reliable supply. With a 50-gallon capacity, these water heaters are well-suited for medium-sized families. They incorporate innovative heating technology, ensuring high recovery rates to provide hot water quickly. These models often feature an easy-to-use thermostat and are equipped with advanced insulation to minimize heat loss, improving energy efficiency.

For smaller households, the Kenmore 153.320491 HT 40 GAL water heater is an ideal choice. This model maintains a balance between compact design and sufficient hot water capacity. It utilizes energy-efficient heating elements and advanced sensors to optimize performance. The 40-gallon capacity makes it perfect for apartments or smaller homes, offering consistent hot water without excessive energy consumption.

On the higher end, the Kenmore 153.320890 HT 82 GAL and 153.320891 HT 82 GAL models are perfect for larger households or commercial installations. With an impressive 82-gallon capacity, these water heaters are ideal for high-demand situations. They are designed with advanced heating technology, which includes multiple heating elements for faster water heating and recovery. The larger capacity means less frequent cycling, which can lead to improved energy efficiency and lower utility bills.

In all these models, safety features are a priority. They come equipped with temperature and pressure relief valves, ensuring safe operation even in high-demand scenarios. Additionally, many of these water heaters are built with corrosion-resistant materials, enhancing durability and lifespan.

Overall, the Kenmore 153.320590 HT 50 GAL, 153.320491 HT 40 GAL, 153.320890 HT 82 GAL, 153.320591 HT 50 GAL, and 153.320891 HT 82 GAL water heaters provide a versatile array of options for consumers. Whether in need of a compact solution for a smaller space or a robust system for a larger establishment, these models showcase Kenmore’s commitment to quality, efficiency, and safety in water heating technology.