Kenmore 1T6.31100 manual Dust BAG Replacement, To Replace Dust BAG, To Remove Dust BAG

		1
	DUST BAG REPLACEMENT	J
		/
	TO REPLACE DUST BAG
_WARNING	]

Always unplug power cord from electrical! outlet before performing maintenance to thai

vacuum cleaner. 1

TO REMOVE DUST BAG

1.Pull on the Dust Beg

dust bag cover latch located on the side of

the dust bag

cover,,

NOTE: This unit has a bag safety stop which prevents cover from closing if bag is missing or not properly installed, Do not pull on the bag safety stop when

removing/installing	the dust bag.
	2_ Grasp	the
	dust bag	collar
Bag	and pull
Safety Stop	gently,
	carefully
	removing	the
	dust bag	from

Dust Bag			the dust bag
			holder,
the used dust	Dust Bag		N
bogDoreuse dust bag,.o,
	Dust Bag		:i'_
and the motor		Moto
safety filter for		Safety	jl_._J./_l
	i	i	,,,1 i j i1o., t-

CAUTION

NEVER REUSE A DUST BAG_ Very fine materlals_ such as carpel freshener, face powder_ fine dust, plaster, soot_ etc. can clog the bag and cause it to burst before it is full. Change bag more often when vacuuming these materials.

Note: See PARTS AND FEATURES for Bag number°

2. Push dust bag

collar opening completely over the dust bag holder as far as it will go.

3. Tuck the bag into

the dust bag chamber° Be sure

the bottom and sides of the dust

bag are completely within bag cavity

rlor to closing the ag cover.,

4, Close the bag cover. You will

hear a distinct snap when cover is

securely closed°

Check to see that the dust bag is fully

placed in the bag chamber,

NOTE: If bag is not installed or not installed properly the bag safety stop prevents the cover from closing°

17