TO REMOVE CLOG FROM HOSE
Io Rotate the extension hose release lever
Extension
Wand
Wand
Extension Hose
Nozzle
Hose
2.Remove the lower end of the extension hose from the wand holder by grasping the hose collar, twisting, and pulling straight upo
3, Plug in the vacuum cleaner and turn it
on.
4_ Stretch the extension hose to maximum
length and then allow the hose to return to its natural length.
Hose
Storage
Position
I
i
i
/ Hose
I
6_ Rotate hose release lever clockwise to the locked position.
_WARNING
Personal Injury Hazard
DO NOT place hands or Feet under-
neath the vacuum cleaner at any time.
If the dust bog, filter areas and the hose areas are free of clogs, disconnect the nozzle hose from the wand holder and check the nozzle for clogging,,
Clean the agitator according to the instructions in the AGITATOR CLEANING section.
Return the vacuum cleaner to the upright position before plugging into an electrical outlet°
2O