Kenmore 70089, 78189, 70129, 78079 owner manual Operating Instructions, Delay Start Operation

Operating Instructions

Delay Start Operation

To program delay start:

1.Turn unitoff(pressOFFpad).

2.Press DELAY START pad. Display flashes currently programmed temperature setting.

3.Program new temperature setting (if desired) using

Vl Apad.

NOTE: Current temperature setting is used if not changed within 5 seconds.

4.Select desired operating mode and fan speed.

5.Press DELAY START pad. Display flashes currently programmed delay time_l through 24 (hours).

6.Program new delay time (if desired) using V I/_ pad.

NOTE: Current delay time is used if not changed within

5seconds.

7.Press DELAY START pad to start timer. Display shows time remaining until unit automatically starts. At programmed time, unit automatically starts in programmed operating mode.

NOTE: Timer automatically starts after 5 seconds if DELAY START pad is not pressed.

To program automatic stop:

1.Start air conditioner in desired operating mode. If unit is already in desired mode, go to step 2.

2.Press DELAY START pad. Display flashes currently programmed time_l through 24 (hours).

3.Program new time (it desired) using V I A pad.

NOTE: Current time is used if not changed within 5 seconds.

4.Press DELAY START pad to start timer. Display shows time remaining until unit stops. When programmed time elapses, unit automatically stops.

NOTE: Timer automatically starts after 5 seconds if DELAY START pad is not pressed.

To cancel delay stop program, press DELAY START pad after timer starts counting down, or turn unit off (press OFF pad).

Adjusting Airflow Direction

See Figure 38. Position of air discharge vent louvers determines direction of airflow from vent. Direction can

be adjusted upward, downward, left, and right. Figure 38. Airflowfrom Air Discharge Vent

1.Airflow directioncontrol lever

2.Air discharge vent hodzontal louvers

2

To adjust airflow upward or downward, move horizontal louvers on outside of air discharge vent up or down.

To adjust airflow left or right, move airflow direction control lever left or right.

Energy Saving Tips

In addition to operating air conditioner in energy-savingmode, savings of energy and money can be realized by:

•Increasing insulation in walls and ceilings.

•Closing all heating and ventilation diffusers or vents

(including furnace cold air retum vent) in area being cooled.

•Closing drapes or blinds on windows that receive direct sunlight. Install window coverings or awnings on windows not currently covered.

•Adequately ventilating attic. Heat build-up in attic adds to air conditioner cooling load.

•Avoiding use of heat-producing appliances during hottest parts of day.

•Turning off lightsand appliances when not needed.

•For maximum efficiency and cooling, vent door should be closed whenever air conditioner is cooling.