Kenmore 580.72184 owner manual Installation, HOW to Install, Track hole, Screw

Page 6

INSTALLATION

Pick a location which will allow you to blow the cold air into the area you want, Windows used for installation must be strong enough to support the weight of the air conditioner. Good installation with special attention to the proper position of the unit will lessen the chance that service will be needed. When cooling more than one room, installation location is very important since cold air will not turn corners. To cool your rooms, cold air must be blown from the air conditioner in a straight path.

_] Insert the side curtain(ITEM A) into the upper guide and lower guide of the air conditioner. Fasten the curtains to the unit with screws (ITEM E).

Lower Guide

HOW TO INSTALL

BRemove the screws which fasten the cabinet at

the back and side of the unit. Save side screws. Discard back screws.

FIG. 3

B Slide the unit out of the cabinet by gripping the base pan handle and pull forward while bracing the _abinet.

_Open the window.Mark a line on the center of the

window inner sill, Loosely attach the sill bracket (ITEM C) to the support bracket (ITEM B) using the carriage bolt (ITEM I) and the lock nut (ITEM D).

ITEMI

_ Attach the sill bracket to the window sill using the screws (ITEM F). Carefully place the cabinet on the window inner sill and align the center mark on the angle front with the center line marked on the window

lner sill.

 

 

 

 

screw

 

 

nut

trackhole

 

Outer

 

 

windowsill

Carriagebolt

 

F

andlocknut

Sill

FIG. 8

FIG. 4

_Cut the FOAM STRIP (ITEM J) to fit the underside of the window sash. Peel off the backing and attach the FOAM STRIP as shown in Fig. 5.

FIG. 5

BUsing the M-screw (ITEM H) and the lock nut

(ITEM D), attach the support bracket to the cabinet track hole. Use the first track hole after the sill bracket

on the outer edge of the window sill, Tighten the

carriage bolt and the lock nut, Be sure the cabinet slants downward 1/4" from level.

CAUTION: Do not drilla hole in the bottom pan, The unit is designed to operate with approximately 1/2" of water in bottom pan.

Cabinet

INDOOR

OUTDOOR

FIG, 9

-6-

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Acondicionador DE Aire DE Ventana Safety Prevent Accidents Important Safety InstructionsSafety Electrical InformationRecommended Grounding Method National Electrical Code ANSI/NFPAInstallation Requirements Installation Hardware Electrical ServiceInterior wall Track hole InstallationHOW to Install ScrewAm Drainage Drain holeis providedat the rear of theair Screw FIGPart IlF AIR Conditioner is Blocked by Front InstallationRemoval from Window Storm Window FrameCompressor HOW and WHYCapacity and Running Time CondenserVent Control Features UsingLouvers PullAuto Swing AIR Conditioner FeaturesTemp Vertical AIR Direction ControlAIR Filter Cleaning HOW to Remove Front GrilleHOW to Replace the Front Grille Before Calling for Service Cabinet & Front Grille Assy POS. no Description # = Functional Parts580.72184200 Control BOX Assy C17-C AIR Handling & Cycle Parts Compressor Parts POS. no 11/01Installation KIT Assy Installation KIT Assy

580.72184 specifications

The Kenmore 580.72184 is a powerful air purifier that is designed to create a cleaner and healthier indoor environment. This unit is equipped with advanced features and technologies that effectively eliminate airborne pollutants, making it an excellent choice for allergy sufferers and anyone looking to improve their indoor air quality.

One of the standout features of the Kenmore 580.72184 is its multi-stage filtration system. This includes a HEPA filter capable of capturing 99.97% of particles as small as 0.3 microns, such as dust, pollen, pet dander, and smoke. The pre-filter helps to prolong the life of the HEPA filter by capturing larger particles, while the activated carbon filter is designed to absorb odors and volatile organic compounds (VOCs) from the air. This combination of filtration technologies ensures that the air you breathe is as clean as possible.

In addition to its impressive filtration system, the Kenmore 580.72184 features a smart sensor that automatically adjusts the fan speed based on the air quality in the room. This means that when the air quality is poor, the purifier will work harder to clean the air, and when the air quality improves, the unit will reduce its speed to conserve energy. This feature not only adds convenience but also enhances the energy efficiency of the device.

The air purifier operates quietly, making it suitable for use in bedrooms and other quiet spaces. Its compact design allows it to fit seamlessly into various room sizes, and with its sleek appearance, it can complement any home decor. Furthermore, the Kenmore 580.72184 has a filter replacement indicator, ensuring that users are always aware when it's time to change the filters for optimal performance.

The unit also includes a timer function, allowing users to set it to run for specific periods throughout the day. This flexibility makes it easier to incorporate air purification into your daily routine.

Overall, the Kenmore 580.72184 is a feature-rich air purifier that combines efficiency with user-friendly design. With its powerful filtration system, smart technology, and quiet operation, it stands out as a reliable option for anyone looking to enhance their indoor air quality and promote a healthier living space.
Top Page Image Contents