Kenmore 153.318131, 153.318031 owner manual Safety Precautions, Awarningj

Page 2

Safety Precautions

AWARNINGJ

Improper installation, adjustment, alteration, service or maintenancecan cause DEATH, SERIOUS BODILY INJURY,J

OR PROPERTY DAMAGE. Refer to this manual for assis- tance or consult your localSearsService Center for further information.

AWARNING

At the time of manufacture thiswater heater was provided with a combination temperature-pressures relief valve certified by a nationally recognized testing laboratory that maintains periodic inspection of production of listed equipment or materials, as meeting the requirements for Relief Valvesand Automatic Gas

Shutoff Devicesfor Hot Water Supply Systems, andthe current edition of ANSI Z21.22, CSA 4.4 and the code requirements of ASME. If replaced, the valve must meet the requirements of local codes, but not lessthan a combination temperature and

pressure relief valve certified as meeting the requirements for

Relief Valvesand Automatic Gas Shutoff Devicesfor Hot Water

Supply Systems, ANSI Z21.22, CSA 4.4 by a nationally recog- nized testing laboratory that maintains periodic inspection of production of listed equipment or materials.

The valve must be marked with a maximum set pressure not to exceed the marked hydrostatic working pressure of the water heater (150 Ibs./sq. in.) and a discharge capacity not lessthan the water heater input rate as shownon the model rating plate.

(Electric heaters - watts divided by 1000 x 3412 equal BTU/Hr. rate.)

Your local jurisdictional authority, while mandating the use of a temperature-pressure relief valve complying with ANSI Z21.22, CSA 4.4 and ASME, may require a valve model different from the one furnishedwith the water heater.

Compliance with such local requirements must be satisfied by the installer or end user of the water heater with a locally pre- scribed temperature-pressure relief valve installed in the desig-

nated opening in the water heater in place of the factory fur- nished valve.

For safe operation of the water heater, the relief valve must not be removed from it'sdesignatedopening or plugged.

The temperature-pressure relief valve must be installed directly

into the fitting of the water heater designated for the relief valve. Positionthe valve downward and provide tubing so that any dischargewill exit only within 6 inchesabove, or at any dis_ tance below the structural floor. Be certain that no contact is

made with any live electrical part. The dischargeopening must not be blocked or reduced in size under any circumstances. Excessivelength, over 30 feet, or use of more than four elbows can cause restriction and reduce the discharge capacity of the valve.

No valve or other obstruction is to be placed between the relief valve and the tank. Do not connect tubing directly to discharge drain unlessa 6" air gap is provided. To prevent bod- ily injury, hazard to life, or property damage, the relief valve

must be allowed to discharge water in quantities should cir- cumstances demand. If the discharge pipe is not connected to a drain or other suitable means, the water flow may cause property damage.

The Discharge Pipe:

•Must not be smaller in size than the outlet pipe size of the valve,or haveany reducing couplingsor other restrictions.

•Must not be pluggedor blocked.

•Must be of material listed for hot water distribution.

•Must be installed soas to allow complete drainage of both the temperature-pressure relief valve,and the dischargepipe.

•Must terminate at an adequate drain.

•Must not haveany valve between the relief valve and tank.

AWARNING

HAZARD OF ELECTRICAL SHOCK! Before removing

any access panels or servicing the water heater, make I sure the electrical supply to the water heater is turned "OFF". Failure to do this could result in DEATH, SERI-

OUS BOD LY NJURY, OR PROPERTY DAMAGE.

AWARNING

HOTTER WATER CAN SCALD: Water heaters are intended to produce hot water. Water heated to a temper- ature which will satisfy space heating, clothes washing, dish

washing, and other sanitizing needs can scald and perma- nently injure you upon contact. Some people are more like- ly to be permanently injured by hot water than others. These include the elderly, children, the infirm, or physical-

ly/mentally handicapped. If anyone using hot water in your home fits into one of these groups or if there is a local code or state law requiring a certain temperature water at the hot water tap, then you must take special precautions. In addition to using the lowest possible temperature setting

that satisfies your hot water needs, a means such as a mix- ing valve, shall be used at the hot water taps used by these people or at the water heater. Mixing valves are available at plumbing supply or hardware stores. Follow manufacturers

instructions for installation of the valves. Before changing

the factory setting on the thermostat, read the "Temperature Regulation" section in this manual.

AWARNING

WATER HEATERS EQUIPPED FOR ONE VOLTAGE

ONLY: This water heater is equipped for one type volt- age only. Check the rating plate near the bottom access panel for the correct voltage. DO NOT use this water heater with any voltage other than the one shown on the

model rating plate. Failure to use the correct voltage can cause problems which can result in DEATH, SERIOUS

BODILY INJURY, OR PROPERTY DAMAGE. If you have any questions or doubts consult your electric company.

AWARNING

INSULATING JACKETS: When installing an external water heater insulation jacket on an electric water heater: a. DO NOT cover the temperature-pressure relief valve. b. DO NOT put insulation over the access covers or any

access areas.

c. DO NOT remove operating instructions, and safety

related warning labels and materials affixed to the water heater.

d. DO obtain new warning and instruction labels from

Sears for placement on the jacket directly over the

existing labels.

AWARNING

Do not use this appliance if any part of it hasbeen under I water. An electrical short or malfunction could occur.

The water heater sboud be rap aced.

A CAUTION

WATER HEATERS EVENTUALLY LEAK: Installation of the water heater must be accomplished in such a manner that if the tank or any connections should leak, the flow of water will not cause damage to the structure. When such locations cannot be avoided, a suitable drain pan should be installed under the water heater. Drain pans are available at your local hardware store. Such a drain pan must be piped to an adequate drain.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Owners Manual ListedAwarning Safety PrecautionsAwarningj Contents Product Specifications Customer ResponsibilitiesAdditional Tools Needed When Sweat SolderingBasic Tools Installation Instructions Removing the Old Water HeaterFacts to Consider About The Convertible Element Installation Instructions contdFacts to Consider About the Location Pipe Installation Completed Using the Installation KITWater Piping Temperature-Pressure Relief Valve Conversion Parts Screw Buss BAR Filling the Water HeaterConverting the Element DEATH, Serious Bodily Injury or Property DamageConverting the Element contd Property DamageWiring Diagram NJURY,OR Property DamageWiring Installation Checklist Temperature Settings Service and AdjustmentTemperature Regulation Thermostat AdjustmentDraining Temperature-Pressure ReliefContd OUS BOD LY NJURY,OR Property DamageService and Adjustment contd Element Cleaning ReplacementElement Cleaning Replacement contd OUS Bodily INJURY,OR Property Damage Drain Valve Washer ReplacementService Thermal Expansion Troubleshooting GuideStart Up Conditions Strange SoundsSmelly Water Troubleshooting Guide contdHigh Temperature Shut OFF System AIR in HOT Water FaucetsNot Enough or no HOT Water Water is TOO HOTLeakage Checkpoints Page Page Parts Order List Kenmore the Economizer 6 Table TOP Electric Water HeatersParts Order List contd Full ONE YFR Warranty on Water Hekfer Master Protection Agreements

153.318131, 153.318031 specifications

The Kenmore 153.318031 and 153.318131 are contemporary models of dishwashers that combine sophistication with functionality. Known for their efficiency and innovative features, these machines are designed to enhance kitchen experience while delivering exceptional cleaning results.

One of the main features of the Kenmore 153.318031 and 153.318131 is their impressive washing performance. Equipped with powerful jets and a multi-stage washing system, these dishwashers ensure that every dish, from heavily soiled pots to delicate glassware, is cleaned thoroughly. The advanced spray technology allows water to reach all corners of the dishwasher, ensuring that no food particles are left behind.

Energy efficiency is a noteworthy characteristic of these models. Both dishwashers are designed to operate with minimal electricity and water usage, making them a sustainable choice for environmentally conscious consumers. They are compliant with ENERGY STAR® ratings, underscoring their commitment to reducing energy consumption without compromising on performance.

Another striking feature of the Kenmore 153.318031 and 153.318131 is their spacious interior. With adjustable racks and multiple loading options, users can easily customize the arrangement to fit various dish sizes and shapes. The flexibility offered by these models allows for maximum use of interior space, making them ideal for families or those who entertain frequently.

The control panels are user-friendly, often featuring intuitive touch controls and a digital display that offers complete cycle information at a glance. With multiple wash cycles and settings to choose from, users can select the optimal washing program for their specific needs, including options for heavy, normal, quick, and eco-friendly cycles.

Noise reduction technology is another hallmark of these dishwashers. Engineered to operate quietly, the Kenmore 153.318031 and 153.318131 ensure that users can run them at any time without interrupting the household's daily activities or conversations.

In terms of design, both models boast a sleek and modern aesthetic, available in several finishes to match various kitchen decors. Their solid construction not only lends them an attractive appearance but also ensures durability and longevity.

Overall, the Kenmore 153.318031 and 153.318131 are designed to meet the diverse needs of today's households. Combining practicality with cutting-edge technology, they deliver on the promise of cleanliness and efficiency, making them an excellent investment for any kitchen.
Top Page Image Contents