Instructions for Machine Transport Installation

Instructions for Machine Transport

NOTE: Refrigeration equipment must remain upright to avoid damage to the compressor In order to prevent the oil contained in the compressor from flowing into the cooling circuit, it is necessary to always ship, carry, store and handle this Granita machine in an upright position, following the instructions located on the packaging. Never ship, carry, store or handle unit on its side.

Installation

1.) Cut banding straps from box and lift the box off the machine (see fig. 1).

2.) Positioning the machine

The machine must be well ventilated. Leave an 8” (20 cm) clearance on the sides and back of the machine to allow proper ventilation. Installation of the machine near a heat source should be avoided. Some heat sources you should avoid locating this unit too close to are ovens, coffee machines, cold or frozen beverage dispensers or ice machines (equipment with compressors that expel hot air through its vents. An ambient temperature between 59°F (15°C) and 77°F (25°C) is recommended.

Connection to Main Power Supply

•The electrical safety of this Granita machine can only be achieved if the ma- chine is properly connected to an appropriate grounded receptacle that is in com- pliance with current national safety standards. Therefore, the manufacturer cannot be held responsible for damage and/or injury caused by failure to connect the unit to an appropriate power source.

•For a safe and correct installation, connect the unit to a dedicated outlet.

•Do not alter the cord or plug in any way.

•The entire length of the power supply cord must not, in any way, be com pressed (bent or bunched together) nor may extension cords be used.

•Do not obstruct the ventilation and heat dispersion grill vents on the side and rear panels of the unit. An insufficient ventilation process may reduce the efficiency of the machine, causing it to function inadequately, and cause serious damage to the machine. A minimum of eight inches (20cm) clearance is necessary on each side and behind the unit.

WARNING: THIS UNIT MUST BE PROPERLY ELECTRICALLY GROUNDED TO AVOID POSSIBLE FATAL ELECTRICAL SHOCK OR SERIOUS INJURY TO THE OPERATOR. THE POWER CORD IS PROVIDED WITH A THREE PRONG GROUNDED PLUG. IF A THREE-HOLE GROUNDED ELECTRICAL OUTLET IS NOT AVAILABLE, USE AN APPROVED METHOD TO GROUND THE UNIT. DO NOT USE EXTENSION CORDS WITH THIS UNIT. DO NOT “GANG” TOGETHER WITH OTHER ELECTRICAL DEVICES ON THE SAME OUTLET.

OFS20, OFS30 specifications

The Omega OFS20 and OFS30 are notable additions to Omega's lineup of innovative tools, catering to professionals requiring advanced measurement solutions. These devices are designed with precision, versatility, and user-friendly operation in mind, making them ideal for a wide range of applications in various industries, including aerospace, manufacturing, and engineering.

One of the key features of the OFS20 and OFS30 is their advanced sensor technology, which ensures high accuracy and reliability in measurements. Both models utilize state-of-the-art digital sensors that provide instant readings across a broad spectrum of parameters. This enhances the efficiency of workflows and minimizes the risk of error, paramount in industrial settings where precision is critical.

The OFS20 boasts a measurement range capable of handling a wide variety of tasks, making it a multipurpose tool. It is equipped with an easy-to-read display, allowing users to track readings swiftly. The device supports multiple units of measure, simplifying the transition between different measurement standards depending on user needs. Its ergonomic design also ensures that operators remain comfortable during extended use.

Meanwhile, the OFS30 elevates the experience with additional features tailored for more specialized applications. The OFS30 model includes enhanced connectivity options such as Bluetooth and USB interfaces, enabling seamless data transfer to computers or mobile devices for analysis and record-keeping. This feature is particularly beneficial for professionals conducting extensive data logging or requiring remote access to results.

Both models are engineered with robust durability in mind. They are housed in tough, industrial-grade casings that withstand harsh environments, ensuring longevity and reliability even in the most demanding conditions. This durability is complemented by a high degree of water and dust resistance, making them suitable for outdoor applications.

In terms of power, the OFS20 and OFS30 are designed for sustainable use, featuring low-energy consumption components that prolong battery life, thus reducing downtime associated with frequent recharging or battery replacement.

In summary, the Omega OFS20 and OFS30 represent a significant advancement in measurement technology, offering an impressive combination of accuracy, versatility, and user-centric features. With their advanced sensors, robust durability, and enhanced connectivity, these tools are poised to meet the evolving needs of professionals across multiple industries, solidifying Omega's reputation as a leader in measurement solutions.