4Laser Sight Accessory
SECTION 4 - LASER SIGHT ACCESSORY
4.1 – Warnings and Caution
CAUTION:
You may receive harmful laser radiation exposure if you do not adhere to the warnings listed below:
•USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THIS GUIDE MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
•DO NOT LOOK AT THE LASER BEAM COMING OUT OF THE LENS OR VIEW IT DIRECTLY WITH OPTICAL INSTRUMENTS – EYE DAMAGE CAN RESULT.
•USE EXTREME CAUTION WHEN OPERATING THE LASER SIGHT ACCESSORY.
•NEVER POINT THE LASER ACCESSORY AT A PERSON.
•KEEP THE LASER SIGHT ACCESSORY OUT OF REACH OF ALL CHILDREN.
WARNING:
Do not attempt to open the laser sight accessory. There are no user serviceable parts inside.
4.2 – Operating the Laser Sight Accessory
The laser sight accessory screws onto the front of the transmitter sensor head. This accessory is only used for alignment of the transmitter head to the target area. After the alignment process, the accessory has to be removed from the front of the transmitter head before temperature measurement is made.
The laser sight accessory is powered from a small, compact battery pack (included with the accessory). Connect the battery pack to the accessory using the cable provided. Aim at the target, and turn on the battery power using the slide switch on the battery pack. Adjust the sensor head position so that the laser beam points to the center of the target area. Turn off the battery pack, and remove the laser sighting accessory from the sensor head (Fig
7