ADT Security Services SCW9047-433 About Your Security System, Fire Detection, Testing, Monitoring

Page 5

About Your Security System

Your Security System has been designed to provide you with the greatest possible flexibility and con- venience. Read this manual carefully and have your installer instruct you on your system's operation and on which features have been implemented in your system. All users of this system should be equally instructed in its use. Fill out the “System Information” page with all of your zone information and access codes and store this manual in a safe place for future reference.

NOTE: Please consult your installer for further information regarding the false alarm reduction features built into your system as all are not covered in this manual.

Fire Detection

This equipment is capable of monitoring fire detection devices such as smoke detectors and provid- ing a warning if a fire condition is detected. Good fire detection depends on having adequate num- ber of detectors placed in appropriate locations. This equipment should be installed in accordance with NFPA 72 (N.F.P.A., Battery march Park, Quince MA 02269). Carefully review the Family Escape Planning guidelines in this manual.

NOTE: Your installer must enable the fire detection portion of this equipment before it becomes functional.

Testing

To ensure that your system continues to function as intended, you must test your system weekly. Please refer to the “Testing your System” section in this manual. If your system does not function properly, call your installing company for service.

Monitoring

This system is capable of transmitting alarms, troubles & emergency information to a central station. If you initiate an alarm by mistake, immediately call the central station to prevent an unnecessary response.

NOTE: The monitoring function must be enabled by the installer before it becomes functional.

NOTE: This system has a communicator delay of 30 seconds. It can be removed, or it can be increased up to 45 seconds by the installer.

NOTE: Ensure that your Installer verifies that your system is compatible with the Central Station Receiver format at yearly intervals.

Maintenance

With normal use, the system requires minimum maintenance. Note the following points:

•Do not wash the security equipment with a wet cloth. Light dusting with a slightly moistened cloth should remove normal accumulations of dust.

•DSC recommends replacing the standby batteries every 4-5 years.

•For other system devices such as smoke detectors, motion detectors, glassbreak detectors or door/ window contacts, consult the manufacturer’s literature for testing and maintenance instructions if applicable.

General System Operation

Your security system comprises an integrated alarm control/keypad and various sensors and detec- tors. The system is mounted by the main exit/entry location. The system is self-contained; electronics and standby battery are housed within the keypad unit.

NOTE: Only the installer or service professional should have access to the system.

The security system has several zones of area protection. Each of these zones communicates to a sin- gle wireless sensor (motion detectors, glassbreak detectors, door contacts, etc.) or to one or more hard wired sensors. A sensor in alarm is indicated by messages on the LCD keypad.

Additional features include: Automatic Inhibit (Swinger Shutdown) for Alarm; Tamper and Trouble signals after 3 occurrences in a given set period; and a Programmable Keypad Lockout option.

NOTE: For SIA CP-01 classified installations, the swinger shutdown feature is programmed such that one or two trips will shut down the zone. The zone will be restored after a manual reset (by entering the access code at the time of disarming the alarm system) or it will be reset automatically after 48 hrs with no trips on any zones.

1

Page 4 Page 6
Image 5
Page 4 Page 6
Contents User Guide FCC Compliance Statement Table of Contents Important Safety Instructions Maintenance TestingAbout Your Security System Fire DetectionArming & Disarming the System Stay Arming Language SelectionNight Arming Silent Exit DelayAway Arming Quick ExitRemote Arming and Disarming When Alarm SoundsEmergency Keys Way Audio Operation SCW9047 onlyActivating All Bypassed Zones Bypassing ZonesRecalling Bypassed Zones Bypass GroupTo select a Bypass Group when arming the system Alarm MemoryTrouble Conditions Door Chime Entry/Exit BeepsAccess Codes Access Code Programming5Master Code when disarmed User Code AttributesUser Function Commands Erasing an Access CodeBell Squawk Attribute Changing Brightness/ContrastAllowing Computer Access To Your System Testing Your SystemViewing the Event Buffer Sounder and Display TestSystem Information Installer InformationReference Sheets Sensor / Zone Information Guidelines for Locating Smoke Detectors Fire Escape Planning Household Fire Safety AuditPage Page 29007459R001

SCW9047-433, SCW9045-433 specifications

ADT Security Services has established itself as a leader in home and business security, delivering innovative solutions that cater to a diverse range of security needs. Among their product offerings, the SCW9045-433 and SCW9047-433 stand out as exceptional choices for anyone looking to enhance their security measures. These devices integrate advanced technology with user-friendly features, making them ideal for modern surveillance requirements.

The SCW9045-433 and SCW9047-433 are wireless, offering users the flexibility of installation without the hassle of running wires throughout their property. This wireless capability not only simplifies the setup process but also allows for greater placement options, ensuring that users can install cameras in optimal locations to capture the best views of their surrounding areas.

Both models are equipped with high-definition video resolution, ensuring clear and detailed imagery. This clarity enhances the ability to identify faces, license plates, and other critical details that may be vital for security assessments. Additionally, they feature night vision capabilities, allowing for around-the-clock surveillance. This is particularly beneficial for those wanting to monitor their property in low-light conditions.

The SCW9045-433 and SCW9047-433 also come with motion detection technology. This feature allows the devices to capture footage only when movement is detected, saving recording space and making it easier to review footage later. Users can customize sensitivity settings to balance between capturing all action and avoiding false alarms from pets or environmental changes.

Integration with ADT’s central monitoring system provides an added layer of security. Users can receive real-time alerts to their smartphones whenever motion is detected or if there are any breaches in security. This immediate feedback enhances peace of mind, as users can quickly respond to potential threats.

Furthermore, both models are compatible with ADT's suite of smart home devices, allowing for seamless interaction and control through a single application. This connectivity aids in creating a comprehensive security ecosystem, where users can manage and monitor all devices from the convenience of their mobile devices.

In summary, the ADT Security Services SCW9045-433 and SCW9047-433 models exemplify modern security technology with their wireless design, high-definition video, night vision, motion detection capabilities, and integration with ADT's monitoring services. They cater to the need for both effective surveillance and ease of use, making them worthy contenders for anyone serious about their security needs.
Top Page Image Contents