ADT Security Services SCW9045-433 Remote Arming and Disarming, Emergency Keys, When Alarm Sounds

Page 8

Remote Arming and Disarming

The system can be armed and/or disarmed (if programmed by the installer) using a remote control device (wireless key). When arming the system by using the Arm button on the wireless key, the system will acknowledge the command by sounding a single bell squawk and when disarming using the Dis- arm button on the wireless key the system will acknowledge the command by sounding two bell squawks . Three squawks heard when disarming with the disarm button indicates that that an alarm occurred while the system was armed. If you are unsure of the cause of the alarm, proceed with cau- tion.

Emergency Keys

Press the (F), (A) or (P) key for 2 seconds to generate a Fire, Auxiliary or Panic alarm. The keypad sounder will beep indicating that the alarm input has been accepted and transmission to the central station is underway. The (P) key may or may not sound the bell depending on Installer setup.

NOTE: The Fire keys can be disabled by the installer.

When Alarm Sounds

The system can generate 2 different alarm sounds:

•Continuous Siren = Intrusion (Burglary Alarm)

•Temporal / Pulsed Siren = Fire Alarm

Intrusion (Burglary) Alarm Continuous Siren

NOTE: If you are unsure of the source of the alarm, proceed with caution! If the alarm was accidental, enter your Access Code to silence the alarm. If the alarm system is disarmed within the programmed Abort Window (check with the installer if this option has been enabled on your system and what is the transmitter delay time programmed), no alarm transmission to the Central Station will occur. Starting at the end of the Abort Window there is a five minute Cancel window, during which a user can cancel, by entering his access code, an alarm that has been previously transmitted. A cancel signal will be transmitted to the Central Station and the alarm system will also annunciate that the cancel signal was transmitted. Call your central station to avoid a dispatch.

Fire Alarm Pulsed Siren

Follow your emergency evacuation plan immediately!

If the fire alarm was accidental (i.e. burned toast, bathroom steam, etc.), enter your Access Code to silence the alarm. Call your central station to avoid a dispatch.

2-Way Audio Operation (SCW9047 only)

If programmed by the installer, this feature allows the monitoring station to initiate a 2-way audio session when an alarm has been received. This feature is used to verify the nature of the alarm or determine the type of assistance required by the occupant.

NOTE: This feature can be initiated only by the monitoring station after an alarm has been received. The user can not initiate a 2-way audio session.

Time & Date Programming

Press plus your Master Access Code to enter User Functions. Use the scroll keys to find

the menu option then press to select it. Enter the time in 24-hr. format (HH:MM), followed by the

date (MM:DD:YY). Press to exit programming. If you are viewing a ‘Loss of Clock’, trouble from

within the trouble menu ( ), press to directly enter Date and Time programming. See Trou-

ble Conditions on page 6),

NOTE: Your installer may have programmed your system to display the time and date while the key-

pad is idle. Press the key to clear the date and time display if desired.

Bypassing Zones

Use the zone bypassing feature when you need access to a protected area while the system is armed, or when a zone is temporarily out of service, but you need to arm the system. Bypassed zones will not be able to sound an alarm. Bypassing zones reduces the level of security. If you are bypassing a zone because it is not working, call a service technician immediately so that the problem can be resolved and your system returned to proper working order. Ensure that no zones are unintentionally

4

Page 7 Page 9
Image 8
Page 7 Page 9
Contents User Guide FCC Compliance Statement Table of Contents Important Safety Instructions Testing MaintenanceAbout Your Security System Fire DetectionLanguage Selection Arming & Disarming the System Stay ArmingSilent Exit Delay Night ArmingAway Arming Quick ExitWhen Alarm Sounds Remote Arming and DisarmingEmergency Keys Way Audio Operation SCW9047 onlyBypassing Zones Activating All Bypassed ZonesRecalling Bypassed Zones Bypass GroupAlarm Memory To select a Bypass Group when arming the systemTrouble Conditions Door Chime Entry/Exit BeepsAccess Code Programming Access Codes5Master Code when disarmed User Code AttributesErasing an Access Code User Function CommandsBell Squawk Attribute Changing Brightness/ContrastTesting Your System Allowing Computer Access To Your SystemViewing the Event Buffer Sounder and Display TestSystem Information Installer InformationReference Sheets Sensor / Zone Information Guidelines for Locating Smoke Detectors Household Fire Safety Audit Fire Escape PlanningPage Page 29007459R001

SCW9047-433, SCW9045-433 specifications

ADT Security Services has established itself as a leader in home and business security, delivering innovative solutions that cater to a diverse range of security needs. Among their product offerings, the SCW9045-433 and SCW9047-433 stand out as exceptional choices for anyone looking to enhance their security measures. These devices integrate advanced technology with user-friendly features, making them ideal for modern surveillance requirements.

The SCW9045-433 and SCW9047-433 are wireless, offering users the flexibility of installation without the hassle of running wires throughout their property. This wireless capability not only simplifies the setup process but also allows for greater placement options, ensuring that users can install cameras in optimal locations to capture the best views of their surrounding areas.

Both models are equipped with high-definition video resolution, ensuring clear and detailed imagery. This clarity enhances the ability to identify faces, license plates, and other critical details that may be vital for security assessments. Additionally, they feature night vision capabilities, allowing for around-the-clock surveillance. This is particularly beneficial for those wanting to monitor their property in low-light conditions.

The SCW9045-433 and SCW9047-433 also come with motion detection technology. This feature allows the devices to capture footage only when movement is detected, saving recording space and making it easier to review footage later. Users can customize sensitivity settings to balance between capturing all action and avoiding false alarms from pets or environmental changes.

Integration with ADT’s central monitoring system provides an added layer of security. Users can receive real-time alerts to their smartphones whenever motion is detected or if there are any breaches in security. This immediate feedback enhances peace of mind, as users can quickly respond to potential threats.

Furthermore, both models are compatible with ADT's suite of smart home devices, allowing for seamless interaction and control through a single application. This connectivity aids in creating a comprehensive security ecosystem, where users can manage and monitor all devices from the convenience of their mobile devices.

In summary, the ADT Security Services SCW9045-433 and SCW9047-433 models exemplify modern security technology with their wireless design, high-definition video, night vision, motion detection capabilities, and integration with ADT's monitoring services. They cater to the need for both effective surveillance and ease of use, making them worthy contenders for anyone serious about their security needs.
Top Page Image Contents