14Daily use
Fast heat up function
The fast heat up function decreases the heat up time.
Do not put food in the oven when the fast heat up function operates.
Activating the fast heat up function : Touch and hold 
for more then three seconds. If you activate the fast heat up function, the bars on the display 
flash one by one to show that the function operates.
The fast heat up is not available with every oven function. An acoustic signal operates if the fast heat up is not available for set function.
Steam cooking
1.Fill water (800 ml) into the water tank in the control panel.
The water supply is for approximately 40 minutes.
2.Activate the appliance.
3. Set the Steam function (refer to table "Oven function") and temperature.
4.Touch 
to set the DURATION or END function (refer to "Setting the END" or
"Setting the DURATION"). The first steam shows after approximately two minutes. An acoustic signal sounds when the tem- perature is approximately 96°C.
Another signal sounds at the end of cook- ing time.
5. Touch 
to deactivate an acoustic signal and the appliance. When the water tank is empty an acoustic signal sounds.
After the appliance cools down, soak up all remaining water from the steam generator with the Sponge 150 and clean if it is necessary with some vinegar.
Let the appliance dry fully with the open door.
