What to do if… 27
4.Hold the door glass panels on their top edge one by one and pull them up out of the guide
5. Clean the door glass panels.
To install panels follow the procedure in re- verse. Install the smaller panel first, then the larger.
WHAT TO DO IF…
WARNING!
Refer to "Safety information" chapter.
Problem | Possible cause |
|
| Solution |
|
|
|
| |
The appliance does not heat up | The appliance is deactivated |
| Activate the appliance | |
|
|
|
| |
The appliance does not heat up | The time of day is not set |
| Set the clock. Refer to "First set- | |
|
|
| ting the time of day" | |
|
|
|
| |
The appliance does not heat up | The necessary settings are not |
| Make sure, the settings are cor- | |
| set |
| rect | |
The appliance does not heat up | The automatic |
| Refer to „Automatic switch- | |
| tivated |
| off“ | |
|
|
|
| |
The appliance does not heat up | The fuse is released |
| Make sure, if the fuse is the | |
|
|
| cause for the malfunction. If | |
|
|
| the fuse releases again and | |
|
|
| again, refer to an authorized | |
|
|
| electrician | |
|
|
|
| |
The oven lamp does not operate | The oven lamp is defective |
| Replace the oven lamp. | |
|
|
|
| |
The display shows F102 | The door lock is defect |
| • Close the door correctly | |
|
|
| • | Deactivate the appliance |
|
|
|
| with the house fuse or the |
|
|
|
| safety switch in the fuse |
|
|
|
| box and activate it again |
|
|
| • | If the display shows F102 |
|
|
|
| again, refer to the Service |
|
|
|
| Center |
|
|
|
|
|
The display shows an error | There is an electronic error |
| • | Deactivate the appliance |
code that is not in this list |
|
|
| with the house fuse or the |
|
|
|
| safety switch in the fuse |
|
|
|
| box and activate it again |
|
|
| • | If the display shows the er- |
|
|
|
| ror code again, refer to the |
|
|
|
| Service Center |
|
|
|
|
|
If you cannot find a solution to the problem yourself, contact your dealer or the service centre.
