ADT Security Services 3000EN manual 11%1

6FKHGXOLQJFRQWLQXHG					<
5. For event number “02,” enter the access group
		+6394291&)6
number. Otherwise, this prompt is skipped.
Press [∗] to continue to the “Start” prompt below.					<
AM = 0; PM = 1		,,￿11%1		￿￿￿￿￿￿￿
6. For event numbers “03-07,” enter the partition		4%68-8-32
number to be armed or disarmed.
0	= arm all; 1 = partition 1; 2 = partition 2;
3	= arm common
Otherwise, this prompt is skipped.
Press [∗] to continue to the “Start” prompt.
7. Enter the event’s start time and days of week.
		78%68		718;8*7
Hour = 00-12; minute = 00-59
Days = Position the cursor under the desired days
using the [∗] key to move forward, then press “1” to
select the day.
Press [∗] to continue.
8. Enter the event’s stop time, AM/PM and days of week.
		7834		718;8*7
Refer to step 7 for available entries.
Press [∗] to continue.		,,￿11%1		￿￿￿￿￿￿￿
9. Enter the desired repeat option.		6)4)%8348-32
		￿￿￿			<
0	= no repeat
1	= repeat schedule weekly
2	= repeat schedule biweekly (every other week)	6%	-
3	= repeat schedule every third week
4	= repeat schedule every fourth week
e.g., To make a schedule that happens everyday you
would select all days with a repeat count of 1. To make
a schedule that runs for one week then stops, select
everyday with a repeat count of 0.
10. Select the randomize option, if desired.
0	= no; 1 = yes	￿=2(31￿==7>)			<
If selected, the schedule times will vary within 60

minutes of the “hour” time. For example, if a schedule is set to start at 6:15pm, it will do so the first time 6:15pm arrives, but on subsequent days it will start anytime between 6:00 and 6:59 p.m. Press [∗] to continue.

– 36 –