Therma-Stor Products Group TS-261B Transporting the Phoenix, Location, Electrical Requirements

Page 3

2.Locate the two mounting holes for the handle assembly on the Mini-Guardian HEPA System cabinet. They are located in close proximity to the top of the cabinet near the corners. A lock nut should be visible through each of the mounting holes and is held in place by a retainer plate secured to the cabinet shell. Verify lock nut is visible in each mounting hole.

4.Tighten each of cap screws using the 8mm hex key until the handle assembly is secured against the cabinet surface and all space between parts is eliminated.

Figure 2: Mounting holes

3.Place a socket head cap screw (M10 x 35mm) into each of the holes in the handle end brackets. Position the handle assembly up against the Phoenix Mini-Guardian HEPA System cabinet so as to align the cap screws with the mounting holes in the cabinet.

It may be necessary to tilt the handle assembly up at a slight angle in order to align the screws with the lock nuts. Use the 8mm hex key to press the cap screws into the mounting holes and engage the threads of the lock nuts.

Figure 3: Handle tilting for assembly

Figure 4: Tightening screws

2.2 Transporting the Phoenix

The Phoenix Mini-Guardian HEPA System should be upright when transported by vehicle. It may be tipped on to its back for loading and moving by hand or for use on location.

2.3 Location

Note the following precautions when locating the Phoenix Mini-Guardian HEPA System:

·It is designed to be used INDOORS ONLY.

·If used in a wet area, plug it into a GROUND FAULT INTERRUPTER.

·DO NOT use the Phoenix Mini-Guardian HEPA System as a bench or table.

·The air inlet on top & the side outlets should be at least 1 foot from walls and other obstructions to airflow.

2.4 Electrical Requirements

The Phoenix Mini-Guardian HEPA System can be plugged into a grounded 15 Amp circuit. It draws about 2 Amps with clean filters and no ducting. The amp draw will decrease slightly with added ducting and as the filters load with particulate.

If an extension cord is required, it must have a minimum of 18 gauge conductors if 25 feet long or less and 16 gauge conductors if greater than 25 feet long.

Toll-Free 1-800-533-7533

www.thermastor.com • sales@thermastor.com

Image 3
Contents Phoenix Mini-Guardian Hepa System Hepa SystemSpecifications Handle Assembly ProcedureOperation Transporting the Phoenix LocationElectrical Requirements Power/Speed Control Air DuctingNegative Air Ducting Checking Airflow MaintenanceHour Meter Air FiltersLoosen thumb screws Service WarrantyImpeller Fan Replacement Twist tabs Service Parts This page intentionally left blank Toll-Free Phoenix Mini-Guardian Hepa System Limited Warranty

TS-261B specifications

The Therma-Stor Products Group TS-261B is a highly advanced dehumidifier designed for both residential and commercial applications. This unit stands out in the market for its robust construction, efficient performance, and user-friendly features. Designed with a focus on moisture control, the TS-261B is particularly beneficial in environments where humidity levels need to be managed effectively, such as basements, crawl spaces, and laundry rooms.

One of the key features of the TS-261B is its high-capacity dehumidification ability. The unit can remove up to 70 pints of moisture per day, making it suitable for larger spaces or areas with significant moisture issues. Its powerful yet energy-efficient compressor ensures that it can operate continuously without significantly impacting energy bills, providing an economical solution to managing humidity.

The TS-261B is equipped with advanced technology that enhances its performance and operational convenience. One notable feature is its built-in hygrometer, which continuously monitors the humidity levels in the space being treated. This allows the unit to automatically adjust its operation to maintain the desired humidity level without user intervention. The adjustable humidistat provides users with the flexibility to set specific humidity targets, tailoring the dehumidification process to individual needs.

Another advantage of the TS-261B is its lightweight and compact design. Weighing just under 40 pounds, this unit is portable and easy to relocate as needed. It features built-in handles and durable wheels, allowing for convenient movement from one area to another. The integrated pump also enables direct drainage of accumulated water, reducing the need for manual emptying and enhancing operational convenience.

In terms of durability, the TS-261B is built with high-quality materials that ensure longevity. The corrosion-resistant housing is designed to withstand the rigors of continuous operation, making it suitable for varied environments. Furthermore, the unit operates quietly, ensuring minimal disruption while maintaining optimal humidity levels.

Overall, the Therma-Stor TS-261B offers a perfect blend of efficiency, technology, and user-friendly features. From its powerful moisture removal capabilities to its innovative automatic settings, this dehumidifier is an excellent solution for anyone looking to effectively manage humidity in their living or working spaces.