Therma-Stor Products Group TS-285 owner manual Read and Save These Instructions

Page 1

PO Box 8680 • Madison, WI 53708

Phoenix Axial Air Mover TS-285

Owner’s Manual — Phoenix Axial Air Mover

Installation, Operation & Service Instructions

Read and Save These Instructions

The Phoenix Axial Air Mover is the industry’s only Air Mover specifically engineered with patent pending FOCUSTM Technology. FOCUSTM Technology revolutionizes evaporative drying by producing air velocities greater than competitive product offerings. This highly focused air flow is directed towards the restoration industry’s problematic drying areas namely, carpet and pad, sub-floor, sill plate and walls. No other fan dries the sill plate as quickly! Finally, the Phoenix Axial Air Mover with FOCUSTM Technology sustains these air velocities further than any other Axial Air Mover.

The Phoenix Axial Air Mover includes a 2-speed motor delivering a focused airstream of approximately 3000 cfm, lightweight stackable

enclosure designed to fit existing vehicle rigging, on-board duplex GFCI outlet, circuit breaker, superior cord management and hour meter.

Conventional air movers create a circular air jet. With a circular air jet the only way to get air into the square corner is to point the fan towards the corner. This angle toward the wall wastes valuable air velocity and throw distance. FOCUSTM Technology creates an air jet with a square corner, resulting in optimized drying ability. In addition, the Axial Air Mover features built in 4.5° positioning which increases the fans ability to dry.

Dry fast, smart and profitably with Phoenix.

Phoenix Axial Air Mover

Approximately 3000 CFM air flow directed where you need it.

Operator interface conveniently located for easy access, featuring: power indicator lamp, large three- position switch, circuit breaker, GFCI outlet, and hour meter.

Daisy-chain up to four Phoenix Axial Air Movers on a single circuit.

Integral circuit breaker eliminates nuisance trips to the breaker box.

Axial Air Mover itself is also GFCI protected.

Units interlock for ease of stacking during storage and handling.

Weighs 2.5 lbs less than competitive units.

Linear low density polyethylene construction.

Low bearing temperatures increase motor life.

Permawick®, low maintenance, long life lubrication.

Phoenix Axial Air Mover PN 4025200

Specifications subject to change without notice.

Revised 1/07

Toll-Free 1-800-533-7533



www.thermastor.com • sales@thermastor.com

Image 1
Contents Phoenix Axial Air Mover Read and Save These InstructionsLire ET Conserver CES Instructions Safety InformationPower Requirements Safety CertificationsSpecifications Intended ApplicationApplications PlacementIntegrated Cord Wrap Sizing for Water Restoration Jobs12 Amp Resettable Circuit Breaker Operator Panel FeaturesOperating Instructions Run-Time Hour MeterPower Indication Lamp Maintenance3-Position Drying Selector Switch Gfci Protection and the On-Board Duplex VAC OutletWiring Diagram Replacement Parts and Optional AccessoriesCleaning Motor LubricationThis page intentionally left blank Toll-Free Phoenix Axial Air Mover Limited Warranty

TS-285 specifications

The TS-285 from Therma-Stor Products Group is a standout model in the realm of dehumidification technology, meticulously designed to address various moisture control challenges in both residential and commercial settings. Ideal for situations that require efficient moisture management, the TS-285 offers an array of features that make it a reliable solution for maintaining optimal humidity levels.

One of the standout features of the TS-285 is its robust performance and efficiency. This unit is capable of removing impressive amounts of moisture from the air, making it suitable for environments that experience high humidity levels. With a powerful compressor and optimized airflow design, the TS-285 can effectively control dampness, thereby reducing the risks of mold growth and structural damage associated with excessive moisture.

The TS-285 is also equipped with advanced technologies that enhance its functionality. For instance, its automatic humidistat control allows for a precise measurement of humidity levels and adjusts the dehumidification cycle accordingly. This not only ensures consistent performance but also helps save energy, making the unit cost-effective in the long run. Furthermore, the model features a continuous drainage option, which allows for hassle-free operation without the need for frequent manual emptying of the water tank.

Design-wise, the TS-285 boasts a rugged construction, ensuring durability even in harsh environments. Its compact design enables easy maneuverability, allowing users to transport it to different locations with ease. Moreover, the whisper-quiet operation of this unit ensures that it can be used in various settings without causing disturbances.

Safety and user convenience are also paramount in the TS-285's design. It includes built-in safety features such as a high-temperature cutoff and an auto-restart function, which provides peace of mind and security during operation. Additionally, the clearly labeled controls and digital display facilitate ease of use, allowing anyone to operate the unit efficiently regardless of their technical expertise.

In summary, the Therma-Stor Products Group TS-285 is a powerful, efficient, and user-friendly dehumidifier that is perfectly suited to meet the demands of both residential and commercial environments. With its blend of advanced technology, durable construction, and practical features, the TS-285 stands out as a top choice for effective moisture management. It represents a smart investment for those seeking to improve indoor air quality and protect their spaces from the adverse effects of humidity.