Therma-Stor Products Group TS-285 Replacement Parts and Optional Accessories, Wiring Diagram

Page 7

9.2 Motor Lubrication

Oil the unit every six months with 3 - 4 drops of SAE 20 weight non-detergent oil. Lubricate the motor with a drop of oil after each washing.

IMPORTANT: The approved oil for lubrication is SAE 20 weight non-detergent oil, specifically designated for use with electric motors.

9.3 Cleaning

The housing is made of a durable and washable polyethylene. When cleaning, the use of solvents is NOT recommended.

When washing inside the unit, disconnect the unit from its power source. Protect the operator interface panel with

a cloth. Clean inner barrel, grills and blade. Wipe down motor exterior with a damp cloth. If the motor gets wet during cleaning, simply allow ample time for motor to dry out completely before restarting. If you clean your device frequently perform motor lubrication more frequently as well.

If you wash the Axial Air Mover and do not plan to use it within 24 hours, allow the fan to drip dry for 10 minutes and then let run for 5 minutes. Before storing it, apply oil as described above.

10 Replacement Parts and Optional Accessories

Contact the factory at 1-800-533-7533 to order replacement parts, or optional accessories

4025203 Breaker, CKT, 12A

4025204 Switch, Rocker, On-Off-On

4025205 Outlet, Duplex, GFCI, 15A

4025206 Grill, Safety, Intake

4025207 Grill, Safety, Exhaust

4025460 Axial Air Mover Stand

4025299 Stand Hardware Kit

Figure 11: Optional stand allows the Axial Air Mover’s air flow to be directed in a 360° range of movement. (PN 4025460)

11 Wiring Diagram

Specifications subject to change without notice.

Toll-Free 1-800-533-7533

www.thermastor.com • sales@thermastor.com

Image 7
Contents Phoenix Axial Air Mover Read and Save These InstructionsLire ET Conserver CES Instructions Safety InformationIntended Application Safety CertificationsPower Requirements SpecificationsSizing for Water Restoration Jobs PlacementApplications Integrated Cord WrapRun-Time Hour Meter Operator Panel Features12 Amp Resettable Circuit Breaker Operating InstructionsGfci Protection and the On-Board Duplex VAC Outlet MaintenancePower Indication Lamp 3-Position Drying Selector SwitchMotor Lubrication Replacement Parts and Optional AccessoriesWiring Diagram CleaningThis page intentionally left blank Toll-Free Phoenix Axial Air Mover Limited Warranty

TS-285 specifications

The TS-285 from Therma-Stor Products Group is a standout model in the realm of dehumidification technology, meticulously designed to address various moisture control challenges in both residential and commercial settings. Ideal for situations that require efficient moisture management, the TS-285 offers an array of features that make it a reliable solution for maintaining optimal humidity levels.

One of the standout features of the TS-285 is its robust performance and efficiency. This unit is capable of removing impressive amounts of moisture from the air, making it suitable for environments that experience high humidity levels. With a powerful compressor and optimized airflow design, the TS-285 can effectively control dampness, thereby reducing the risks of mold growth and structural damage associated with excessive moisture.

The TS-285 is also equipped with advanced technologies that enhance its functionality. For instance, its automatic humidistat control allows for a precise measurement of humidity levels and adjusts the dehumidification cycle accordingly. This not only ensures consistent performance but also helps save energy, making the unit cost-effective in the long run. Furthermore, the model features a continuous drainage option, which allows for hassle-free operation without the need for frequent manual emptying of the water tank.

Design-wise, the TS-285 boasts a rugged construction, ensuring durability even in harsh environments. Its compact design enables easy maneuverability, allowing users to transport it to different locations with ease. Moreover, the whisper-quiet operation of this unit ensures that it can be used in various settings without causing disturbances.

Safety and user convenience are also paramount in the TS-285's design. It includes built-in safety features such as a high-temperature cutoff and an auto-restart function, which provides peace of mind and security during operation. Additionally, the clearly labeled controls and digital display facilitate ease of use, allowing anyone to operate the unit efficiently regardless of their technical expertise.

In summary, the Therma-Stor Products Group TS-285 is a powerful, efficient, and user-friendly dehumidifier that is perfectly suited to meet the demands of both residential and commercial environments. With its blend of advanced technology, durable construction, and practical features, the TS-285 stands out as a top choice for effective moisture management. It represents a smart investment for those seeking to improve indoor air quality and protect their spaces from the adverse effects of humidity.