Therma-Stor Products Group TS-285 owner manual Operating Instructions, Operator Panel Features

Page 5

Making use of factory installed feet (4)

Making use of user installed feet (2)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Counter

Clockwise

clockwise

airflow

airflow

pattern

pattern

 

Figure 7: Birds eye view of room set-up

User installed feet for use during clockwise drying set-ups

Factory installed feet for use during counter clockwise drying

Figure 8: Clockwise feet locations

If the water restoration professional dries in the clockwise direction often, we suggest attaching the two (factory provided) rubber feet into the threaded holes on the side of the unit. By attaching the rubber feet and creating the optimal downward angle of 4.5°, the Phoenix Axial Air Mover will maximize air velocity across the floor and wall when drying in the clockwise direction.

12 Amp

Circuit Breaker

Hour Meter

AC Indicator Lamp

Figure 9: Axial Air Mover Operator Panel

7 Operating Instructions

The Phoenix Axial Air Mover as packaged is ready to be put into service. Inspect the unit completely for any shipping damage. Place the unit on the ground. Check the GFCI to ensure it is not tripped. Orient the unit so the desired air flow direction is the same as the arrow indicator sticker in the FOCUS Technology corner on the interior of the unit. Plug the unit into a grounded outlet and select the drying mode shown in Figure 9.

CAUTION: The Phoenix Axial Air Mover consumes 2.5 Amps. Do not plug devices requiring more than 9.0 Amps of current into the duplex outlet.

8 Operator Panel Features

8.1 Run-Time Hour Meter

The operator interface panel is equipped with an Automatic LCD (Liquid Crystal Display) Hour meter. This hour meter displays cumulative run time. The hour meter meets IP65 for moisture and dust protection and is designed to survive harsh restoration and water recovery applications. The hour meter features non-volatile eeProm memory. This type of memory cannot be erased, nor reset. This feature ensures accurate time tracking.

The display can be used to track time-of-operation and time-to-dry. Some restoration professionals use the hour meters to help them establish hourly billables.

8.2 12 Amp Resettable Circuit Breaker

The 12 AMP thermal response resettable circuit breaker protects the unit and devices connected to its duplex GFCI outlet.

The circuit breaker is designed to sense the total current draw through the circuit. The circuit breaker “trips” when more than 12 amps of electrical current are drawn through

High Speed: “Ultra”

GFCI: Added Protection

Drying Power

 

Low Speed:

Stainless Steel

Quiet Operation

Control Panel

Toll-Free 1-800-533-7533

www.thermastor.com • sales@thermastor.com

Image 5
Contents Phoenix Axial Air Mover Read and Save These InstructionsLire ET Conserver CES Instructions Safety InformationPower Requirements Safety CertificationsSpecifications Intended ApplicationApplications PlacementIntegrated Cord Wrap Sizing for Water Restoration Jobs12 Amp Resettable Circuit Breaker Operator Panel FeaturesOperating Instructions Run-Time Hour MeterPower Indication Lamp Maintenance3-Position Drying Selector Switch Gfci Protection and the On-Board Duplex VAC OutletWiring Diagram Replacement Parts and Optional AccessoriesCleaning Motor LubricationThis page intentionally left blank Toll-Free Phoenix Axial Air Mover Limited Warranty

TS-285 specifications

The TS-285 from Therma-Stor Products Group is a standout model in the realm of dehumidification technology, meticulously designed to address various moisture control challenges in both residential and commercial settings. Ideal for situations that require efficient moisture management, the TS-285 offers an array of features that make it a reliable solution for maintaining optimal humidity levels.

One of the standout features of the TS-285 is its robust performance and efficiency. This unit is capable of removing impressive amounts of moisture from the air, making it suitable for environments that experience high humidity levels. With a powerful compressor and optimized airflow design, the TS-285 can effectively control dampness, thereby reducing the risks of mold growth and structural damage associated with excessive moisture.

The TS-285 is also equipped with advanced technologies that enhance its functionality. For instance, its automatic humidistat control allows for a precise measurement of humidity levels and adjusts the dehumidification cycle accordingly. This not only ensures consistent performance but also helps save energy, making the unit cost-effective in the long run. Furthermore, the model features a continuous drainage option, which allows for hassle-free operation without the need for frequent manual emptying of the water tank.

Design-wise, the TS-285 boasts a rugged construction, ensuring durability even in harsh environments. Its compact design enables easy maneuverability, allowing users to transport it to different locations with ease. Moreover, the whisper-quiet operation of this unit ensures that it can be used in various settings without causing disturbances.

Safety and user convenience are also paramount in the TS-285's design. It includes built-in safety features such as a high-temperature cutoff and an auto-restart function, which provides peace of mind and security during operation. Additionally, the clearly labeled controls and digital display facilitate ease of use, allowing anyone to operate the unit efficiently regardless of their technical expertise.

In summary, the Therma-Stor Products Group TS-285 is a powerful, efficient, and user-friendly dehumidifier that is perfectly suited to meet the demands of both residential and commercial environments. With its blend of advanced technology, durable construction, and practical features, the TS-285 stands out as a top choice for effective moisture management. It represents a smart investment for those seeking to improve indoor air quality and protect their spaces from the adverse effects of humidity.