Extron electronic ISM 482 Integration Scaling Matrix Switcher Operation3-14, User Presets menu

Operation, cont’d
Integration Scaling Matrix Switcher • Operation3-14
User Presets menu
Figure 3-11 is a flowchart that shows an overview of the User Presets menu, the
Save Preset and Erase Preset submenus, and the available settings.
Use either Adjust knob
to select a preset or no
preset (N/A). Press Next.
Use either Adjust knob
to select a preset or no
preset (N/A). Press Next.
If necessary,
select the
unselected
output.
1
OUTPUTS
2
Default
Cycle
Menu
Menu
Next
1
OUTPUTS
If necessary,
select the
unselected
output.
2
Next
10 sec.
10 sec.
Video & Audio
Configuration
Menu
Output
Configuration
Menu
Advanced
Configuration
Menu
User Presets
Menu
Next
Exit Menu
Press Next to Exit
Menu
Save Out #2 Preset
<N/A> 1 2 3
Erase Out #1 Preset
<N/A> 1 2 3
Next
NOTE To save a preset for the second
output after saving the preset
for the first, start over from
the default cycle.
10 sec.
NOTE To erase a preset for the second
output after erasing the preset
for the first, start over from
the default cycle.
Figure 3-11 — User Presets menu flowchart
Save Preset submenu
Select the output with the settings that you want to save as a preset by pressing the
desired Output button.
Rotate either the Adjust or the Adjust knob while in the Save Preset submenu to
highlight (< >) one of three memory presets for the selected output or highlight
N/A for no preset. Press the Next button to save the current settings to the selected
preset. Select N/A and press the Next button to exit without saving the settings.
Presets are saved sets of values for the current color, tint, contrast, brightness,
detail, sizing, and centering settings. Presets saved in nonvolatile memory; when
the ISM is powered down and later powered back up, the settings are available for
selection. Saving the settings to a preset number overwrites the settings previously
written to that preset number.
The color, tint, contrast, brightness, detail, sizing, and centering adjustments
are tailored for the selected output rate. If you change the output rate and then
recall a preset for the earlier rate, the adjustments recalled in the preset have no
effect on the video output. However, if you then change back to the earlier
output rate, the effects of the adjustments appear on the screen if they were not
overwritten for the old output rate.