Installing the software

The program is included on the same CD-ROM as the ISS/ISM Control Program and is installed automatically when you install that program. It can also be downloaded from the Extron Web site (http://www.extron.com).

By default, the files are installed in either the C:\ISSISM directory, if installed automatically with the ISS/ISM Control Program, or the C:\BUTTONS directory if installed as a stand-alone program. The Button-Label Generator icon is placed in the “Extron Electronics” group or folder.

Using the software

1.To run the Button-Label Generator program, click Start >

Programs > Extron Electronics > Button-Label Generator. Extron’s Button-Label Generator window appears (figure 5-7).

2.Under Systems selection, choose ISS 408/ISM 482. This selection creates the correctly sized labels for the ISM’s label strip. The button label editing area changes to reflect the number and arrangement of buttons on the device.

Figure 5-7 — Extron’s Button-Label Generator window

3.Using standard Windows controls, you can create and print labels that can be cut out and placed in the label windows on the front panel of the ISM.

For information about using the program, you can access a help file by clicking on the Help menu on the main screen and choosing Show Help.

You can also see an example of a completed Extron Button-Label Generator window by clicking the Help menu on the main screen, choosing Show Help, and clicking the Load Demo button.

Integration Scaling Matrix Switcher • Switcher Software

5-7

Page 70
Image 70
Extron electronic ISM 482 manual Using the software, To run the Button-Label Generator program, click Start