Factory Preset Values

SECTION 13. FACTORY PRESET VALUES

Table 13-1 Factory Preset Values

MENU ITEM	FACTORY PRESET VALUES
INPT	Input Type: 385.3 (3 wire DIN RTD)
DEC.P	Decimal Point Position: FFF.F
RD.CF	Reading Configuration:
	R.1=F (Fahrenheit)
S1.CF	Setpoint 1 Configuration:
	S.1=A (Setpoint is active above)
	S.2=U (Setpoint is unlatched)
	S.3=0 (Setpoint 1 is assigned to T1-T2)
S2.CF	Setpoint 2 Configuration:
	S.1=A (Setpoint is active above)
	S.2=U (Setpoint is unlatched)
	S.3=0 (Setpoint 2 is assigned to T1-T2)
S1.DB	Setpoint 1 Deadband: .0003
S2.DB	Setpoint 2 Deadband: .0003
OT.CF	Output Configuration:
	O.1=E (Analog output is enabled)
	O.2=C (Analog output is current)
	O.3=A (Analog output follows the display value)
OUT	Analog Output Routing: T1 - T2

OT.S.O	Output Scale and Offset:
	0-1000 = 4-20 mA dc
T1.OF	RTD for T1: 000.0
T2.OF	RTD for T2: 000.0
SP1	Setpoint 1 Value: 000.0
SP2	Setpoint 2 Value: 000.0