Omega DP26-RTD manual Analog Output if applicable

ANALOG OUTPUT (if applicable)

Signal type:	Current or voltage
Signal level:	Current: 10 V max compliance at 20 mA output
	Voltage: 20 mA max for 0-10 V output
Function:	May be assigned to a display range or proportional
	control output with setpoint #1 when used as a
	control output.
Linearity:	0.2%
Load Regulation:	1.1%
Line Regulation:	0.02% /V ac
Step Response Time:	2 - 3 seconds to 99% of the final value

ALARM OUTPUTS (if applicable)

2 Form "C" on/off relays. Configurable for latched and unlatched by software.

Max current:	5 AMPS, resistive load.
Max voltage:	250 V ac or 30 V dc

ISOLATED ANALOG OUTPUT (TB5, if applicable)

Same as non-isolated analog output except isolated to 1000 Vdc.

Signal Type:	Current or voltage
Signal Level:	Current: 10 V max compliance at 20 mA output
	Voltage: 20 mA max for 0-10 V output
Function:	May be assigned to a display range or proportional
	control output with setpoint #1 when used as a
	control output.
Linearity:	0.2%
Step Response Time:	2 - 3 seconds to 99% of the final value

Only one analog output is available on each unit and it must be factory installed.

51