Section |
|
| |
|
|
| Page |
| 4.8 SELECTING OUTPUT CONFIGURATION (OT.CF) | . .26 | |
| 4.8.1 | Enabling or Disabling The Analog Output | . .26 |
| 4.8.2 | Selecting Analog Output as Current or Voltage | . .27 |
| 4.8.3 Selecting Analog Output or Proportional Control | . .27 | |
| 4.9 ROUTING ANALOG OUTPUT (OUT) | . .29 | |
| 4.10 SELECTING PROPORTIONAL BAND (P.BND) | . .29 | |
| 4.11 USING MANUAL RESET (M.RST) | . .31 | |
| 4.12 SCALING THE ANALOG OUTPUT (OT.S.O) | . .32 | |
| 4.13 RTD TEMPERATURE OFFSET ERROR CORRECTION | . .36 | |
5. | ACCESSING THE DEVIATION MODE | . .38 | |
6. | SELECTING METER DISPLAY | . .39 | |
7. | TUNING THE PROPORTIONAL CONTROLLER | . .41 | |
8. | DISPLAY MESSAGES | . .42 | |
9. | MENU CONFIGURATION | . .43 | |
10. FRONT PANEL DISPLAYS | . 45 | ||
11. SETPOINT CONFIGURATION DISPLAYS | . .48 | ||
12. SPECIFICATIONS | . .49 | ||
13. FACTORY PRESET VALUES | . .53 | ||
14. CE APPROVALS | . .54 | ||
v
