Heat & Glo LifeStyle 8000TVC manual Safety and Warning Information

Page 2

i

SAFETY AND WARNING INFORMATION

!

READ and UNDERSTAND all instructions carefully before starting the installation.

FAILURE TO FOLLOW these installation instructions may result in a possible fire

 

hazard and will void the warranty.

 

 

!

Prior to the first firing of the fireplace, READ the Using Your Fireplace section of the

Owners Guide.

 

 

!

DO NOT USE this appliance if any part has been under water. Immediately CALL a

qualified service technician to inspect the unit and to replace any part of the control

 

system and any gas control which has been under water.

 

 

!

THIS UNIT IS NOT FOR USE WITH SOLID FUEL.

 

 

!

Installation and repair should be PERFORMED by a qualified service person. The

appliance and venting system should be INSPECTED before initial use and at least

 

annually by a professional service person. More frequent cleaning may be required

 

due to excessive lint from carpeting, bedding material, etc. It is IMPERATIVE that the

 

unit’s control compartment, burners, and circulating air passageways BE KEPT

 

CLEAN to provide for adequate combustion and ventilation air.

 

 

!

Always KEEP the appliance clear and free from combustible materials, gasoline, and

other flammable vapors and liquids.

 

 

 

!

NEVER OBSTRUCT the flow of combustion and ventilation air. Keep the front of the

appliance CLEAR of all obstacles and materials for servicing and proper operations.

 

 

!

Due to the high temperature, the appliance should be LOCATED out of traffic areas

and away from furniture and draperies. Clothing or flammable material SHOULD

 

NOT BE PLACED on or near the appliance.

 

 

!

Children and adults should be ALERTED to the hazards of high surface temperature

and should STAY AWAY to avoid burns or clothing ignition. Young children should be

 

CAREFULLY SUPERVISED when they are in the same room as the appliance.

 

 

!

These units MUST use one of the vent systems described in the Installing the

Fireplace section of the Installers Guide. NO OTHER vent systems or components

 

MAY BE USED.

 

 

!

This gas fireplace and vent assembly MUST be vented directly to the outside and

MUST NEVER be attached to a chimney serving a separate solid fuel burning

 

appliance. Each gas appliance MUST USE a separate vent system. Common vent

 

systems are PROHIBITED.

 

 

!

INSPECT the external vent cap on a regular basis to make sure that no debris is

interfering with the air flow.

 

 

!

The glass door assembly MUST be in place and sealed, and the trim door assembly

MUST be in place on the fireplace before the unit can be placed into safe operation.

 

 

!

DO NOT OPERATE this appliance with the glass door removed, cracked, or broken.

Replacement of the glass door should be performed by a licensed or qualified

 

service person. DO NOT strike or slam the glass door.

 

 

!

The glass door assembly SHALL ONLY be replaced as a complete unit, as supplied

by the gas fireplace manufacturer. NO SUBSTITUTE material may be used.

 

 

!

DO NOT USE abrasive cleaners on the glass door assembly. DO NOT ATTEMPT to

clean the glass door when it is hot.

 

 

!

Turn off the gas before servicing this appliance. It is recommended that a qualified

service technician perform an appliance check-up at the beginning of each heating

 

season.

!

Any safety screen or guard removed for servicing must be replaced before operating

this appliance.

Image 2
Contents Heat-N-Glo Safety and Warning Information Safety and Warning Information Table of ContentsInstalling the Fireplace Approvals and CodesApprovals and Codes Installation CodesHigh Altitude Installations CodesGetting Started Diagram of 8000TVC Clearance Requirements Installing the FireplaceStep Locating Fireplace CeilingStep Negative Pressure Make-up Air Models a B CInstalling Optional Outside Make-up Air Air DamperStep Installing Vent System Vent System ApprovalsVent System Attachment Bedroom Installation in Canada Vent TerminationStanding Pilot Ignition System Step Positioning Leveling, Securing FireplaceStep Gas Control Systems Direct Spark Ignition DSI SystemGas Controls Systems Step Gas Supply Line Step Gas Pressure Requirements Pressure Natural Gas PropaneOptional Accessories Step Wiring FireplaceFor Standing Pilot Ignition Wiring Remote Wall SwitchFor Direct Spark Ignition DSI Wiring Fan Wiring DiagramDirect Spark Ignition DSI Wiring Diagram Step Finishing Hearth ExtensionsPositioning the Logs Step Installing Trim Logs, Ember MaterialInstalling the Trim Save the log instructions with this manualGlass Assembly Double-check for gas leaks Double-check for faulty componentsStep Before Lighting Fireplace Fireplace Maintenance Maintaining and Servicing Your FireplaceBurner Flame Patterns Replacement Parts Accessories Standing Pilot OnlyDSI Ignition Only Part Part DescriptionBoth Standing Pilot and DSI Ignition 8000TRC 26 1/2 X 42 1/2 TemperedBoth Standing Pilot and DSI Ignition PAR T Part Description Part Number Accessory Part Description Part Number

8000TVC specifications

The Heat & Glo LifeStyle 8000TVC is a contemporary gas fireplace designed to elevate any living space with its modern aesthetic, efficiency, and advanced technology. This model is unique, featuring a stunning viewing area that enhances the ambiance of home interiors while offering the warmth and comfort associated with traditional fireplaces.

One of the key characteristics of the LifeStyle 8000TVC is its expansive glass front, which provides a captivating view of the flames. This design not only enhances the visual appeal but also improves heat distribution throughout the room. It is equipped with both direct vent and vent-free options, allowing homeowners to select the best installation approach for their specific needs. The versatile configuration gives more flexibility in placement within various living spaces.

The fireplace utilizes innovative technology for efficient heating and comfort. It features a multi-speed blower, which aids in the efficient circulation of warm air, improving overall comfort without the need to increase the thermostat. The advanced IntelliFire ignition system ensures reliable start-ups with just the push of a button, streamlining the operation for users.

Safety is paramount in the design of the LifeStyle 8000TVC. It incorporates a state-of-the-art safety screen that remains cool to the touch, minimizing risks associated with accidental contact. Additionally, the unit is designed for ease of maintenance, featuring accessible components that simplify cleaning and service.

Customization is another highlight of this fireplace. The LifeStyle 8000TVC offers a variety of media options, from traditional logs to modern fire-glass, allowing users to personalize the look and feel of their fireplace. The unit is available in different finishes to seamlessly blend with various interior décor styles.

Moreover, the fireplace is compatible with smart home technology, allowing for remote operation via mobile devices or integrated home systems. This feature enhances convenience, enabling users to adjust the temperature and settings from anywhere in the home.

In summary, the Heat & Glo LifeStyle 8000TVC combines elegance, efficiency, and advanced technology, making it an ideal choice for homeowners looking to add a stylish and functional fireplace to their living space. With its modern features and customizable options, it serves not only as a source of heat but also as a stunning focal point in any room.