Heat & Glo LifeStyle 8000TVC manual Approvals and Codes, Approval Listings Appliance Certification

Page 4

1

Approvals and Codes

1

Approval Listings Appliance Certification

and Codes

The Heat-N-Glo fireplace models discussed in this

 

 

Installers Guide have been tested to certification

 

 

standards and listed by the applicable laboratories.

 

 

 

 

 

 

 

 

 

CERTIFICATION

MODEL

 

LABORATORY

TYPE

STANDARD

 

 

 

 

 

8000TVC

 

Underwriters

Vented

ANSIZ21.50•CGA2.2

 

 

Laboratories

Gas Fireplace

 

 

 

 

 

 

Installation Codes

The fireplace installation must conform to local codes. Before installing the fireplace, consult the local building code agency to ensure that you are in compliance with all applicable codes, including permits and inspections.

In the absence of local codes, the fireplace installation must conform to the National Fuel Gas Code ANSI Z223.1 (in the United States) or the CAN/CGA- B149 Installation Codes (in Canada). The appliance must be electrically grounded in accordance with local codes or, in the absence of local codes with the National Electric Code ANSI/NFPA No. 70 (in the United States), or to the CSA C22.1 Canadian Electric Code (in Canada).

These models (natural gas and propane) can be installed in a bedroom (in the United States) which has a total volume of unconfined space appropriate to the particular installation. Refer to the National Fuel Gas Code ANSI Z223.1/NFPA54 (current edition). The Uniform Mechanical Code - (current edition), and local Building Officials for the options allowed in obtaining an effective bedroom volume of unconfined space.

These models (natural gas and propane) can be installed in a bedroom (in Canada) if a thermostat (Model WH-STAT) is installed with the unit. Consult local code authorities. Detailed installation instructions for Model WH-STAT are included with the kit.

High Altitude Installations

U.L. Listed fireplaces are tested and approved for elevations from 0 to 2,000 feet in the U.S.A. and are tested and approved for elevations from 0 to 4,500 feet in Canada.

When installing this fireplace at an elevation above 2,000 feet (in the United States), it may be necessary to decrease the input rating by changing the existing burner orifice to a smaller size. Input should be reduced four percent (4%) for each 1,000 feet above sea level, unless the heating value of the gas has been reduced, in which case this general rule will not apply. To identify the proper orifice size, check with the local gas utility.

When installing this fireplace at an elevation between 2,000 and 4,500 feet (in Canada), the input rating must be reduced by ten percent (10%).

When installing this fireplace at an elevation above 4,500 feet (in Canada), check with local authorities.

Consult your local gas utility for assistance in determining the proper orifice for your location.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Heat-N-Glo Safety and Warning Information Table of Contents Installing the FireplaceSafety and Warning Information Approvals and CodesInstallation Codes High Altitude InstallationsApprovals and Codes CodesGetting Started Diagram of 8000TVC Installing the Fireplace Step Locating FireplaceClearance Requirements CeilingStep Negative Pressure Make-up Air Models a B CInstalling Optional Outside Make-up Air Air DamperStep Installing Vent System Vent System ApprovalsVent System Attachment Bedroom Installation in Canada Vent TerminationStep Positioning Leveling, Securing Fireplace Step Gas Control SystemsStanding Pilot Ignition System Direct Spark Ignition DSI SystemGas Controls Systems Step Gas Supply Line Step Gas Pressure Requirements Pressure Natural Gas PropaneStep Wiring Fireplace For Standing Pilot Ignition WiringOptional Accessories Remote Wall SwitchFor Direct Spark Ignition DSI Wiring Fan Wiring DiagramDirect Spark Ignition DSI Wiring Diagram Step Finishing Hearth ExtensionsStep Installing Trim Logs, Ember Material Installing the TrimPositioning the Logs Save the log instructions with this manualGlass Assembly Step Before Lighting Fireplace Double-check for faulty componentsDouble-check for gas leaks Fireplace Maintenance Maintaining and Servicing Your FireplaceBurner Flame Patterns Replacement Parts Accessories Standing Pilot OnlyDSI Ignition Only Part Part DescriptionBoth Standing Pilot and DSI Ignition 8000TRC 26 1/2 X 42 1/2 TemperedBoth Standing Pilot and DSI Ignition PAR T Part Description Part Number Accessory Part Description Part Number

8000TVC specifications

The Heat & Glo LifeStyle 8000TVC is a contemporary gas fireplace designed to elevate any living space with its modern aesthetic, efficiency, and advanced technology. This model is unique, featuring a stunning viewing area that enhances the ambiance of home interiors while offering the warmth and comfort associated with traditional fireplaces.

One of the key characteristics of the LifeStyle 8000TVC is its expansive glass front, which provides a captivating view of the flames. This design not only enhances the visual appeal but also improves heat distribution throughout the room. It is equipped with both direct vent and vent-free options, allowing homeowners to select the best installation approach for their specific needs. The versatile configuration gives more flexibility in placement within various living spaces.

The fireplace utilizes innovative technology for efficient heating and comfort. It features a multi-speed blower, which aids in the efficient circulation of warm air, improving overall comfort without the need to increase the thermostat. The advanced IntelliFire ignition system ensures reliable start-ups with just the push of a button, streamlining the operation for users.

Safety is paramount in the design of the LifeStyle 8000TVC. It incorporates a state-of-the-art safety screen that remains cool to the touch, minimizing risks associated with accidental contact. Additionally, the unit is designed for ease of maintenance, featuring accessible components that simplify cleaning and service.

Customization is another highlight of this fireplace. The LifeStyle 8000TVC offers a variety of media options, from traditional logs to modern fire-glass, allowing users to personalize the look and feel of their fireplace. The unit is available in different finishes to seamlessly blend with various interior décor styles.

Moreover, the fireplace is compatible with smart home technology, allowing for remote operation via mobile devices or integrated home systems. This feature enhances convenience, enabling users to adjust the temperature and settings from anywhere in the home.

In summary, the Heat & Glo LifeStyle 8000TVC combines elegance, efficiency, and advanced technology, making it an ideal choice for homeowners looking to add a stylish and functional fireplace to their living space. With its modern features and customizable options, it serves not only as a source of heat but also as a stunning focal point in any room.
Top Page Image Contents